Audinate

Dante 応用製品

Alcorn McBride - V-Page VP32K

The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness.

Alcorn McBride - V-Page VP4X

The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room

Allen & Heath - Dante 128x128

The Dante 128x128 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 128 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording of up to 64 channels via Dante Virtual Soundcard.

Allen & Heath - Dante 64x64

The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.

Allen & Heath - dLive C1500

The C1500 is the first rack-mountable control Surface for the dLive MixRack. Packed in a tiny footprint are 12 faders over 6 layers, built-in audio I/O, an audio networking port, a 12″ capacitive touchscreen and the innovative Harmony UI for the fastest workflow in the industry.

Allen & Heath - dLive C2500

The C2500 is a small-footprint yet powerful control Surface for the dLive MixRack. It features 20 faders over 6 layers, built-in audio I/O, an audio networking port, a 12″ capacitive touchscreen and the innovative Harmony UI for the fastest workflow in the industry.

Allen & Heath - dLive C3500

The C3500 is the largest C Class control Surface for the dLive MixRack. It features 24 faders over 6 layers, built-in audio I/O and networking port, dual 12″ capacitive touchscreens and the innovative Harmony UI for the fastest workflow in the industry.

Allen & Heath - dLive CDM32

The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

Allen & Heath - dLive CDM48

The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

Allen & Heath - dLive CDM64

The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

Allen & Heath - DM0

At just 4U, DM0 is the most compact dLive MixRack and is targeted at distributed audio scenarios and digital splits. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It can be controlled with a dLive Surface, using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

Allen & Heath - DT168

The DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any SQ or dLive Dante network.

Allen & Heath - GLD-112

GLD-112 is a larger version of the popular GLD-80 mixer, with an extra bank of 8 control strips, increasing the channel count to 28 fader strips in 4 layers.

Allen & Heath - GLD-80

GLD is a user-friendly, cost effective and scalable live digital mixing system, conceptually based on the hugely successful digital iLive series.

Allen & Heath - iDR-16

This product has reached end of life. Please refer to dLive CDM32.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. The tiny iDR-16 is ideal where the physical I/O requirement is small, but as with all the MixRacks can also be used to process the full 64 channels in a compact linked system with digital mic split.

Allen & Heath - iDR-32

This product has reached end of life. Please refer to dLive CDM32.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. The iDR-32 sits in the middle of the fixed format range with 32 Mic/Line inputs and 16 XLR line outputs.

Allen & Heath - iDR-48

This product has reached end of life. Please refer to dLive CDM48.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. The iDR-48 sits in the middle of the fixed format range with 48 Mic/Line inputs and 24 XLR line outputs.

Allen & Heath - iDR-64

This product has reached end of life. Please refer to dLive CDM64.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. It contains 64 Mic/Line inputs and 32 XLR line outputs.

Allen & Heath - iDR0

This product has reached end of life. Please refer to dLive DM0.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. The compact iDR0 is just a DSP in a rack, perfect when teamed with a larger MixRack using a digital mic split, for example linked FOH/Monitor systems.

Allen & Heath - iDR10

This product has reached end of life. Please refer to dLive DM64.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. The modular iDR10 provides the largest I/O count, format flexibility and RAB2 module for more network options.

Allen & Heath - iLive-112

This product has reached end of life. Please refer to dLive S5000.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-112 allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

Allen & Heath - iLive-144

This product has reached end of life. Please refer to dLive S5000.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-144 allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

Allen & Heath - iLive-176

This product has reached end of life. Please refer to dLive S7000.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The flagship iLive-176 is the biggest of the modular series and allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

Allen & Heath - iLive-80

This product has reached end of life. Please refer to dLive S3000.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-80 allows a variety of audio I/O modules, network formats and redundant power supply options, and can be shipped in a touring flight case.

Allen & Heath - iLive-R72

This product has reached end of life. Please refer to dLive C1500.

The iLive-R72 provides an ultra-compact rack mountable solution with fixed format I/O. It features a backlit TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.

Allen & Heath - iLive-T112

This product has reached end of life. Please refer to dLive C3500.

The iLive-T112 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O.

Allen & Heath - iLive-T80

This product has reached end of life. Please refer to dLive C2500.

The iLive-T80 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual ‘write-on’ strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.

Allen & Heath - M-DL-ADAPT

The M-DL-ADAPT ‘letter-box’ interface fits in any dLive I/O port on MixRack or Surace and adds compatibility with most iLive/GLD audio networking cards, including M-Dante, M-waves, M-ES-V2, M-ACE a

Allen & Heath - SQ-5

Powered by Allen & Heath’s revolutionary XCVI 96kHz FPGA engine, SQ-5 is built for professionals in the most demanding live sound applications. Delivering class-leading high resolution audio with an ultra-low <0.7ms latency, the SQ-5 gives you unrivalled power and audio fidelity. 

Allen & Heath - SQ-6

Powered by Allen & Heath’s revolutionary XCVI 96kHz FPGA engine, SQ-5 is built for professionals in the most demanding live sound applications. Delivering class-leading high resolution audio with an ultra-low <0.7ms latency, the SQ-5 gives you unrivalled power and audio fidelity. 

Allen & Heath - SQ-7

SQ-7 is the 33-fader flagship console in the SQ series, powered by Allen & Heath’s revolutionary 96kHz XCVI FPGA engine.

Allen & Heath - xDR-16

This product has reached end of life. Please refer to DT168.

xDR-16 is a 16 input, 8 output expander for iLive digital mixing systems. Whether you simply want to accommodate more sources or whether you want local I/O in different areas of a stage or venue, xDR-16 adds to the convenience and flexibility of the iLive concept.

Alteros - GTX3224

The GTX3224 simultaneously supports up to 24 channels, an additional 24 channels of talkback audio, and eight group assignment channels in just 3U of rack space. 

Amadeus - HOLOPHONIX

HOLOPHONIX is a unique audiophile-grade sound spatialization processor, co-designed with world-renowned French musical, theatrical, and scientific institutions.

Amadeus - PMX 12 D

The PMX 12 D system hosts a coaxial driver with a 12-inch (30 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 12 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.