Dante-enabled Products

The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX 400.

 

24 tracks digital on-site audio recorder with embeddeed mixer plate, intuitive interface and a optional Dante board with 32 channels input and output.

Designed for the professional audio market, the LD Systems® DSP 44 K power amp was developed in cooperation with Ram Audio, whose products are sold in many countries by Adam Hall Group.

The AEQ ARENA is a digital mixing console for radio and television broadcast applications.

The backbone of the BC-2000 D Router Digital Audio system is the double TDM bus, housed in the BC-2000 D frame, with the capacity to route, mix or distribute more than a thousand channels simultane

Dante card for BC-2000D router or ARENA digital mixing console.

CAPITOL IP is an 8 channel digital mixing console based on the AEQ CAPITOL console and the experience gained with this model.

Dante card for Capitol console.

The FORUM is a self-contained digital audio mixing console specifically designed to meet the most rigorous demands of the radio and television broadcast industry.

Dante card for FORUM console.

CrossNet 104 has 64-ports Dante IP interface, 8 Kroma digital intercom ports, 12 balanced, broadcast quality analogue ports, and 20 compressed audio IP ports.

CrossNet 168 has 128-ports Dante IP interface, 8 Kroma digital intercom ports, 12 balanced, broadcast quality analogue ports, and 20 compressed audio IP ports. 

CrossNet 72 has 32-ports Dante IP interface, 8 Kroma digital intercom ports, 12 balanced, broadcase quality analogue ports, and 20 compressed audio IP ports.

Series 8000 user intercom panels have been designed to provide broadcast quality audio and to be used with the digital technology of Conexia and CrossNET matrixes. Audio is captured and processed at 48kHz, with 24 bits/sample, providing full audio bandwidth with negligible noise and distortion levels.

We present two different interfaces for multi-channel AoIP under the common name NETBOX.

The Olympia commentary system uses the audio platform TITAN - BC 2000D router.

Active Column Speaker with DANTE® Input

Digital steerable active Column-Speaker with DANTE®-Input

Digital steerable active Column-Speaker with DANTE®-Input. The AIMLINE ALX-series consist of the ALX-8, that can be cascaded up to 4 units vertically and horizontally.

Digital steerable active Column-Speaker with DANTE®-Input

Digital steerable active Column-Speaker with DANTE®-Input

Digital steerable active Column-Speaker with DANTE®-Input

Engineered and made in Germany, the DMM14 U digital automatic microphone mixer is ideal for large meetings and conferences. 

The DMM8 U digital automatic microphone mixer is ideal for large meetings and conferences. 

The DMS800, reference digital wireless microphone system is designed to provide accurate signal transmission and reliability in theaters, conferences, live productions and tour sound applications.

The DSR800 reference two-channel digital wireless receiver provides an ultra-wide bandwidth of up to 150MHz for reliable operation with the flexibility to meet the needs of a wide range of applicat

The A/V Binloop is the ultimate frame accurate synchronized audio and video player.

VPage provides facility-wide intelligent paging using Dante audio networks.

VPage provides facility-wide intelligent paging using Dante audio networks.

VPage provides facility-wide intelligent paging using Dante audio networks.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

dLive is so much more than a mixer. It is a fully developed ecosystem with over 800 system inputs and 800 outputs.

GLD-112 is a larger version of the popular GLD-80 mixer, with an extra bank of 8 control strips, increasing the channel count to 28 fader strips in 4 layers.

GLD is a user-friendly, cost effective and scalable live digital mixing system, conceptually based on the hugely successful digital iLive series.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces. It contains 64 Mic/Line inputs and 32 XLR line outputs.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces.

The MixRack is the heart of the iLive system, housing the DSP, most of the I/O, networking and control interfaces.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position.

The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position.

Fixed Format, Rack mounted-12 faders

Fixed Format 28 faders

The iLive-T112 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O.

Fixed Format 20 faders

M-Dante is one of a range of digital audio networking options available for iLive and GLD to enable integration with other systems, digital mic splitting, multi-track recording and system expansion

ME-U is a touring grade, 10 port PoE hub providing power and audio to connect multiple ME-1 personal mixers.

xDR-16 is a 16 input, 8 output expander for iLive digital mixing systems.

The PMX 12 D system hosts a coaxial driver with a 12-inch (30 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 12 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.

The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.

The PMX 8 D system hosts a coaxial driver with a 8-inch (20 cm) neodymium woofer (LF) and a 1-inch diaphragm compression driver (HF). The PMX 8 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 400 Watts under 8 ohms.

The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced.

The AMK DS61-A loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker.

The AMK DS62-A loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power.

The AMK DS62-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power.

The AMK DS64-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power.

The AMK DS64-C loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power.

The AMK DS82-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This is a 2 Channel System.

The AMK DS84-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient 8" coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and two AX series XLR analogue outputs in a molded housing.

Multi-format converter - converts and splits between ADAT, MADI optical, MADI coaxial, MADI-TP, AES50 and Dante - all in a 1U unit! Includes an headphones amplifier, redundant power supply and many other nice tools. Currently under development are break-out boxes to support even more protocols (AES3, AVB, Waves Soundgrid), as well as an integrated, high-quality, bi-directional ASRC module.

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. 

AES67 compliant, it is excellent to use with any existing Dante or AES67 network.

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. 

AES67 compliant, it is excellent to use with any existing Dante or AES67 network.

Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets.

Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers.

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors.

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors.

Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers.

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

nX is our base model, available in either 2 or 4-channel models with a range of power options. All have Selectable Outputs and Ashly EMS™ (Energy Management System) for power efficiency.

nX is our base model, available in either 2 or 4-channel models with a range of power options. All have Selectable Outputs and Ashly EMS™ (Energy Management System) for power efficiency.

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

The nXe1.52 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. 

The nXe1.54 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

The nXe3.02 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode.

The nXe3.04 is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. 

The nXe4002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode.

The nXe4004 unit is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

The nXe8002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode.

The nXe8004 is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode.

The nXp1.52 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode.

The nXp1.54 is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode.

nXp Series amplifiers are the networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

The nXp3.02 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode.

The nXp3.04 is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode.

The nXp4002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode.

The nXp4002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.

The nXp8002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode.

The nXp8004 is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode.

Dante® Digital Interface For Ashly equipment (Factory Installed)

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box.

The BB-1616DT is a BlueBridge DSP audio processor featuring a 16 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satis

The BlueBridge® BB-168AECDT DSP audio processor with Acoustic Echo Cancellation and Dante™ is a powerful and flexible tool offering mission critical solutions to successfully satisfy your customers’ teleconferencing and video conferencing needs.

The BB-168DT is a BlueBridge DSP audio processor featuring a 16 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy

The BB-816DT is a BlueBridge DSP audio processor featuring a 8 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy

The BB-88DT is a BlueBridge DSP audio processor featuring a 8 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy t

The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.

The Atlas Sound High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlas Sound High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlona OmniStream™ AT-OMNI-232 is a Dante networked audio interface that transmits and receives two channels of audio over a network. AT-OMNI-232 devices are ideal for integrating microphones and other audio sources with a Dante-equipped DSP and OmniStream AV decoders.

Control proxy device providing access to Dante routing and Attero Tech device monitoring and control

The unD4I 4-input Dante interface is a convenient, cost-effective way to add mic/line inputs to an existing Dante-based networked audio system.

The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations.

The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

The unD4I-L is a four channel mic/line input interface with four logic inputs and four logic outputs.

A 4-output Dante interface that is a convenient, cost-effective way to add line-level outputs to an existing Dante-based networked audio system.

A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.

The unD6IO-BT is the latest addition to Attero Tech's innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive.

The unDAES-O is a Dante to AES3 bridge. 

The unDIO2x2 2 In/2 Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

 An audio monitoring solution aimed at providing end users with a simple solution for selection and monitoring of up to 64 Dante audio channels.

The NT110 is a portable digital audio mixer with inherited reliability and features of the NT880, TAMURA’s Flagship model.

The unDUSB bridges host USB devices, like computers, directly to a Dante network.

The unDX2IO Dante™ Audio Interface is a cost effective multi‐IO wall box. The unDX2IO features two balanced mic/line XLR inputs and two balanced XLR line outputs.

The unDX4I is a 4 input, 2-gang wall plate interface that also includes two outputs.

The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more.

The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more.

The AUDAC SMA350 is a two channel Class-D power amplifier with an output power of 2 x 350 Watt.

The AUDAC SMA500 is a two channel Class-D power amplifier with an output power of 2 x 500 Watt.

The AUDAC SMA750 is a two channel Class-D power amplifier with an output power of 2 x 750 Watt.

The SMQ series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations.

The AUDAC SMQ500 is a four channel Class-D power amplifier with an output power of 4 x 500 Watt.

The AUDAC SMQ750 is a four channel Class-D power amplifier with an output power of 4 x 750 Watt.

The XMP44 is a professional modular audio system with 4 SourceCon™ interface card slots whereto a wide variation of optional modules can be installed. 

Dante Via is easy-to-use software that delivers unprecedented routing of computer-based audio, allowing a wide range of applications and devices to be networked and interconnected, easily and inexpensively.

Dante Virtual Soundcard is a simple, easy-to-use software application that turns a Windows or Mac OS X computer into a Dante-enabled device, enabling you to instantly connect to any Dante network.

The DX1010 is a fully digital, true diversity receiver (which means signal switching takes place between the two receivers at the audio frequency level with no interruption of the signal). It features full encryption and has an analogue output and an AES digital output that’s SuperSlot™ compatible.

Measuring just 83 x 64 x 18mm, the TX1010 transmitter is built from milled, high grade aluminium and features a switchable power output operating at 50mW, 20mW or 5mW which is supplied by two 1.5V LR6 AA batteries housed in a hinged, lockable compartment.

Equipped with the same Dante user switch capabilities as the ATND971 boundary mic, the ATND8677 desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone

The ATND8734 is a Dante-enabled wall/ceiling plate power module designed for use with compatible microphones that have a TA3F-type connector, including the ES931/MIC and ES933/MIC.

With its low-profile and rugged-yet-highly-flexible design, the ATND931C cardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

With its low-profile and rugged-yet-highly-flexible design, The ATND931H hypercardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

With its low-profile and rugged-yet-highly-flexible design, The ATND931ML MicroLine® (line cardioid) condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

With its low-profile and rugged-yet-highly-flexible design, The ATND931WC cardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

With its low-profile and rugged-yet-highly-flexible design, The ATND931WH hypercardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications. 

With its low-profile and rugged-yet-highly-flexible design, The ATND931WML MicroLine® (line cardioid) condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

The ATND933C cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933H hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933ML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. 

The ATND933WC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933WH hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933WML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica has bridged the gap between audio and IT with the first wired microphones that transmit audio and control data together over the Dante network protocol.

The IPX-TC1 provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT™ technology, which synergizes various IP/AV standards to work together as one.

Utilizing Aurora’s IPBaseT™ technology, which combines various IP/AV standards to work together as one, the IPX-TCW3 Series provides one of the most advanced IP Streaming solutions on the market. 

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.

AVBx3-DANTE-CN32IO bundle is a modular audio platform giving access to a full bidirectional Dante to CobraNet® bridge. It can handle up to 2x32 channels between the two networks.

AVBx3-DANTE-ES100 bundle is a modular audio platform giving access to a full bidirectional Dante to EtherSound ES100 bridge. It can handle up to 2x64 channels between the two networks, at sample rates up to 96kHz

AVBx3-DANTE-MADI bundle is a modular audio platform giving access to a full bidirectional Dante to MADI bridge. It can handle up to 2x64 channels between the two networks, at sample rates up to 96kHz.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.

AVDT-BOB-ADE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs, two analog line outputs, one stereo AES/EBU input, one AES/EBU output and four GPIOs on terminal block connectors.

AVDT-BOB-ADX8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on XLR connectors, plus stereo AES/EBU input/outputs and four GPIOs on DB25 connector.

AVDT-BOB-AE4IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on terminal block connectors.

AVDT-BOB-AE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on terminal block connectors.

AVDT-BOB-AS8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on DB25 connector plus optical fiber connection for Dante Network.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.

Bring high-speed, high-quality Dante connectivity and communication to VENUE | S6L with this easy-to-integrate 16-channel audio interface card.

Remote stagebox for SC6L

The Avid VENUE | S6L is a modular system that continues Avid's legacy of live mixing systems—designed to take on the world’s most demanding tours and events with ease. S6L provides onboard plug-ins and Pro Tools integration, more processing power and track counts than ever before, and an array of network and I/O offerings including Dante, so you can easily configure the system to meet the demands of any gig.

The D400-Dante A-Net Distributor provide the link between the personal mixing system's inputs and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.

The D800-Dante A-Net Distributor provides seamless connectivity between a Dante audio network and Aviom Personal Mixers, including the A-16II and new A360.

The Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers.

MAGIC THipPro VoIP is an IP Telephone Hybrid for up to eight or up to 16 caller lines. The 1 RU system provides eight digital Audio lines (4 x AES/EBU interfaces) as well as two analogue XLR Audio interfaces. Additionally, up to two Handsets or Headsets can be connected for Pretalk.

Dual DSP audio processing, dante 64-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; Dante digital network channel signal output 64: Speaker Manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter).

Dual DSP audio processing, dante 8-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; dante signal output 8-channel digital network; speaker manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter). 

The X32's expansion slot provides flexible and expandable connectivity for many different applications.

Compact 40-input, 25-bus digital mixing console with 16 programmable MIDAS preamps, 17 motorized faders, channel LCD's, 32-channel audio interface and iPad/iPhone remote control.

X32 COMPACT is a Compact 40-Input, 25-Bus Digital Mixing Console for Studio and Live application with 16 Programmable MIDAS Preamps, 17 Motorized Faders, Channel LCD's, 32-Channel Audio Interface a

X32 COMPACT-TP is a 40-Input, 25-Bus Digital Mixing Console with 16 Programmable MIDAS Preamps, 17 Motorized Faders, Channel LCD's, 32-Channel Audio Interface and Touring-Grade Road Case.

The X32 CORE takes the brain of the flagship X32 digital mixing console and packs it all into a single rack space.

X32 PRODUCER is a 40-Input, 25-Bus Rack-Mountable Digital Mixing Console for Studio and Live application with 16 Programmable MIDAS Preamps, 17 Motorized Faders, 32-Channel Audio Interface and iPad

X32 PRODUCER-TP is a 40-Input, 25-Bus Rack-Mountable Digital Mixing Console with 16 Programmable MIDAS Preamps, 17 Motorized Faders, 32-Channel Audio Interface and Touring-Grade Road Case.

X32-TP is a 40-Input, 25-Bus Digital Mixing Console with 32 Programmable MIDAS Preamps, 25 Motorized Faders, Channel LCD's, 32-Channel Audio Interface and Touring-Grade Road Case

Suitable for commercial installation, broadcast, live sound, public address and production applications, the BM-A1-64DANTE is an Audio-over-IP (AoIP) audio monitoring unit (AMU) that permits confidence monitoring of any channel present on a Dante(TM) network. 

The Dante-enabled DAN-1 digital server networking card functions as a gateway interface to support 64x64 channels of Dante networked audio.

The Tesira SERVER delivers highly scalable processing that can grow over time with the needs of the end customer — with up to eight DSP-2 cards in a single chassis, and two network cards for

The Biamp Tesira SERVER-IO offers the flexibility to have scalable DSP and I/O in the same device, with up to three DSP-2 cards and up to 12 I/O cards, as well as

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital input

The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital input

The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs

The DCN multimedia system integrates audio, video and meeting content with internet access in one single system.

The DCN multimedia system integrates audio, video and meeting content with internet access in one single system.

The DCN multimedia system integrates audio, video and meeting content with internet access in one single system.

The Bose® ControlSpace® EP22-D Dante endpoint is a convenient and cost-effective 2-in/2-out analog audio interface. The small form factor with PoE make it easy to locate close to analog devices, helping to reduce costly and interference-prone analog wiring.

The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting. 

The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®.

The Bose® ControlSpace ESP-00 Series II engineered sound processor offers high-quality signal processing through a flexible I/O audio platform.

The Bose® ControlSpace® ESP-1240 engineered sound processor is a single-rack-space DSP with an 12x4 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expans

The Bose® ControlSpace® ESP-1600 engineered sound processor is an open-architecture DSP with 16 analog inputs, an 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based

The Bose® ControlSpace® ESP-4120 engineered sound processor is a single-rack-space DSP with an 4x12 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expans

The Bose® ControlSpace® ESP-880 engineered sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansio

The Bose® ControlSpace WP22B-D Dante audio interface is a cost effective multi-I/O wall box. The WP22B-D features two balanced mic/ line XLR inputs and two balanced XLR line outputs.

The ControlSpace WP22BU-D Dante wall plate is a cost effective multi-I/O wall box. The WP22BU-D features a balanced mic/line XLR input and a balanced XLR line output.

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.

The Bose® PowerMatch PM4250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement

The Bose® PowerMatch PM4500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement

The Bose® PowerMatch PM8250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement

The Bose® PowerMatch PM8500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement

The Soundweb London BLU-326 offers configurable I/O, Dante audio, and a high bandwidth, fault tolerant digital audio bus.

The Soundweb London BLU-806 offers configurable I/O, configurable signal processing, Dante audio and a high bandwidth, fault tolerant digital audio bus.

The Soundweb London BLU-DAN offers Dante audio and BLU link.

The B2 Bomber analog to digital converter is designed to give you the ultimate in recording tone. BURL Audio designed an analog audio path that is complimentary to your mic pre and to the analog to

THE B2 BOMBER DIGITAL / ANALOG CONVERTER

80-CHANNEL CONFIGURABLE AD/DA INTERFACE

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs.

Brio is the most powerful and compact digital broadcast audio console in its class. It has a comprehensive broadcast feature set to support a wider breadth of broadcasters, and the same market-leading levels of quality and customer support which Calrec is renowned for.

The CONNECT Dante network bridge provides networked audio distribution capability to CONVERGE® Pro and SR products.

ClearOne’s CONVERGE MATRIX mixer and router provides new opportunities for large scale pro audio installations with up to 512x512 audio channels, with the CONVERGE product line usi

ClearOne’s CONVERGE MATRIX 64 EX mixer and router provides new opportunities for large scale pro audio installations, with the CONVERGE product line using Dante™ audio-over-IP networking technologies. 

ClearOne’s CONVERGE MATRIX 128 EX mixer and router provides new opportunities for large scale pro audio installations, with the CONVERGE product line using Dante™ audio-over-IP networking technologies. 

ClearOne’s CONVERGE MATRIX 128 EX mixer and router provides new opportunities for large scale pro audio installations, with the CONVERGE product line using Dante™ audio-over-IP networking technologies. 

ClearOne’s CONVERGE MATRIX mixer and router provides new opportunities for large scale pro audio installations with up to 512x512 audio channels, with the CONVERGE product line using Dante™ audio-over-IP networking technologies.

Professional conferencing system - Complete, digital matrix mixer conferencing solution with built-in telephone interface and speaker amplifier.

Professional conferencing system - Complete, digital matrix mixer conferencing solution with rich functionality and legacy ClearOne audio performance.

Professional conferencing system - Complete, digital matrix mixer conferencing solution with built-in telephone interface and speaker amplifier.

Professional conferencing system - Complete, digital matrix mixer conferencing solution with four-channel power amplifier.

Professional conferencing system - Complete, digital matrix mixer conferencing solution with built-in telephone interface and speaker amplifier.

The ClearOne Wireless Dante microphones interoperate with other Dante devices from any supplier including ClearOne Dante products such as the new CONVERGE Matrix and the CONNECT Dante bridge for CONVERGE.

The ClearOne Wireless Dante microphones interoperate with other Dante devices from any supplier including ClearOne Dante products such as the new CONVERGE Matrix and the CONNECT Dante bridge for CONVERGE. 

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol.

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology.

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology.

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology.

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology.

The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking. 

The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking. 

The Crestron® Avia™ DSP-128 family of digital signal processors leverages the highest quality components and the expertise of veteran audio industry engineers to deliver a revolutionary audio processing platform that’s actually easy to integrate and configure.

The Crestron® Avia™ DSP-128 family of digital signal processors leverages the highest quality components and the expertise of veteran audio industry engineers to deliver a revolutionary audio processing platform that’s actually easy to integrate and configure.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology.

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment.

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data

The DAD AX32 allows no-compromise audio recording, mastering, post production, and future-proof archiving A new feature is the inclusion of IP audio capabilities handling up to 512 channels on a 10

The DAD DX32 is a versatile digital audio bridge and router interface designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distributio

The Dugan Model N provides 32 channels of Dugan automixing at 96K or 64 channels at 48K with connection capabilities to a Dante network.

The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. 

The DELEC Desk 16 Dante is a 16-key desktop subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

The oratis compact CS0800 DANTE is a half 19-inch/1RU high-performance intercom unit and summing audio matrix.

The oratis compact CS1212 DANTE is a very compact 19-inch/1RU high-performance intercom unit and summing audio matrix.

The oratis compact CS1624 DANTE is a very compact 19-inch/1RU high-performance intercom unit and summing audio matrix.

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.

The oratis IF Dante module supports up to 64 bidirectional audio channels.

The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.

The DIO is the Swiss army knife for audio, with an impressive range of tools and converters.

The unito NAM 203 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.

The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card.

The unito NIO 0800 provides bidirectional format conversion of AES/EBU audio to and from Dante. The NIO 0800 offers 8 AES inputs and outputs and uses RJ45 for high density, easy to use connections.

The unito NIO 1212 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1212 offers 12 AES and 12 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.

The unito NIO 1624 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1624 offers 16 AES and 24 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.

The DHD XC Dante interface can be used with all currently available DHD broadcast consoles and routers. Each XC Dante IP audio interface provides 48 input channels & 48 output channels with integrated sample rate converters. This allows to connect radio automation systems, routers or remote facilities to the DHD console via a standard network infrastructure.

Dante Interface Card for DiGiCo ORANGE BOX I/O Interface

The DigiCo SD-Dante-8 Module offers 8 input and 8 output channels when added to DigiGo SD racks, including the SD-Rack, SD-Mini Rack, and SD-Nano Rack.

Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire.

DiGiCo's belief in audio quality and road worthy mechanical design has limited their ability to release an affordable introductory product. These values have required the same pioneering approach to design, not to follow the trend but to deliver the flagship for a price point - and change expectations. DiGiCo's S21 does exactly that. By using new, lower cost FPGA components programmed with the same audio algorithms, and combined with a new form of control processor, DiGiCo is able to deliver the S21 with the fundamental technological values at it's core.

The SD-Mini Rack complements the SD-Nano and D racks to make a completely flexible remote rack solution for any situation.

The SD-Nano Rack complements the SD, SD-Mini and D racks to make a completely flexible remote rack solution for any situation.

The DiGiCoSD Rack is the newly-designed rack for the various versions of the SD5, SD7, SD8,  SD9, SD10 and SD11 consoles.

SD Ten features three banks of 12 motorised faders and one master fader, each of which benefits from its own high resolution LED bar graph meter.

The SD11 is the smallest by far of all the DiGiCo consoles, though don't let that deceive you: this 19-inch rack mount or table top mixer is a very powerful solution that can be incorporated into pretty much any mixing environment.

Like the SD10, the SD5's 37 faders are laid out in three convenient banks of 12 with one master fader with the added benefit of three 15-inch full colour TFT touch screens for even quicker access and multi-user applications.

A combination of technologies have been seamlessly integrated into the SD7's worksurface to meet the everyday needs of any touring engineer.

The SD8 is a particularly versatile console with the same Stealth Digital Processing and floating point Super FPGA technology seen in the flagship SD7.

The SD9 is a super-flexible, complete integrated system powered by Stealth Digital Processing and floating point Super FPGA technology.

The Digital Audio Labs Livemix LM-Dante-EXP allows the Livemix Personal Mixer to integrate seamlessly with a Dante audio network as part of the Livemix Personal Monitoring System.

The Livemix personal monitor system is extremely easy for volunteers to use but offers the depth of features that professionals demand.

HARVEY mx.16 is a flexible audio and media control matrix and a key component for pa systems and conference systems. It is equipped with 16 analog audio inputs and outputs as well as a great number of different control interfaces and the ideal matrix for conference rooms, theatres, museums, home cinemas, educational facilities and multipurpose rooms.

The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.

The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. 

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. 

Anna™ is the newest introduction to EAW’s flagship line of Adaptive™ Systems, providing all the benefits of Adaptive performance in a high-output mid-sized enclosure.

EAW Anya is a complete, self-contained, high-power sound reinforcement system that adapts all performance parameters electronically, allowing it to be used in virtually any application.

Otto is the world’s first Adaptive™ subwoofer.

The RSX12 12” subwoofer is flyable and ultra-compact, ideal for installs or other applications with minimal floor space for subwoofers. 

The RSX126 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

The RSX129 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

The powerful RSX18 18″ subwoofer is ideal for production applications, offering push-button cardioid operation for added sonic control. 

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms and system integrators. 

The RSX86 features onboard bi-ampli ed electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

The RSX89 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.

ECLER DN44BOB is a 4 inputs and 4 outputs DANTE Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals.

32 in, 32 out Dante interface card for EV Netmax

The NetMax N8000 System Controller is a state-of-the-art digital matrix system offering comprehensive management of all aspects of professional sound reinforcement systems.

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications.

The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor.

2000 W per channel power amplifier.

3500 W per channel power amplifier.

The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.

The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series. The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology.

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system.

The Extron AXI 22 AT D is a single-gang Decora®-style audio interface for integrating two mic/line sources onto a Dante™-enabled DMP 128 audio system.

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. 

The Extron AXP 50 C AT is a five input audio expansion processor with Extron ProDSP™ for integrating remote microphones and other sources onto a Dante™-enabled Extron DMP 128 audio system.

The Extron AXP 64 C AT is an audio expansion processor with six mic/line inputs and four line outputs for remote connectivity to a Dante™-enabled DMP 128 audio system.

The DMP 128 is a 12x8 audio mixer featuring Extron ProDSP™, automixing, I/O expansion capabilities, and available AEC - acoustic echo cancellation.

The Extron DMP 128 Digital Matrix Processor is a 12x8 audio mixer featuring Extron ProDSP™, automixing, available AEC plus Dante™ audio networking, FlexInputs to process Dante channels in place of local mic/line inputs, and POTS analog phone interfacing.

The Extron DMP 128 Digital Matrix Processor is a 12x8 audio mixer featuring Extron ProDSP™, automixing, and available AEC - acoustic echo cancellation plus Dante™ audio networking and POTS analog phone interfacing.

The Extron NetPA 1001‑70V AT is a half rack 1U, convection cooled power amplifiers featuring Dante™ digital audio networking. It delivers a single channel of 100 watts at 70 volts.

The Extron NetPA 502 AT is a half rack 1U, convection cooled power amplifiers featuring Dante™ digital audio networking. It delivers two channels of 50 watts into 4 ohms.

The Extron WPD 102 RCA is a single-gang Decora®-style modules with two female RCA audio connectors. 

The Extron WPD 102 XLRM is a single-gang Decora®-style module with two male XLR audio connectors.

IBC 2016 technology showcase product

The 1RU, 19” rack mounted MSX1000 providing 6 slots for I/O modules, a built in 448 x 448 point router, and optional dual redundant hot-swap PSU and versatile sync system. The perfect solution for medium capacity audio I/O.

IBC 2016 technology showcase product

The MSX 3000 delivers Fairlight’s renowned sound quality for the converged consoles. Its modular design, incorporating cutting edge FPGA technology, delivers a customisable and very cost effective audio I/O solution.

IBC 2016 technology showcase product

The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go.

Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity.

64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity.

RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility.

RedNet Native 8x8 Analog I/O System is the easiest way to add world-class conversion to your DAW, whether you use Cubase, Nuendo, Logic, Pro Tools software, or other DAW for Mac or PC.

RedNet 2 adds 16 remote-controlled analogue channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable.

RedNet Native 16x16 Analog I/O System is the easiest way to add world class conversion to your DAW, whether you use Cubase, Nuendo, Logic, Pro Tools software, or other DAW for Mac or PC.

The Focusrite RedNet 2+5 Package is designed for ProTools users, by offering a special value on the popular combination of RedNet 2 and RedNet 5.

RedNet 3 interfaces your existing digital audio systems and components to the RedNet network, with up to 32 inputs and outputs and full software remote control.

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable.

RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz.

RedNet 6 provides the link between your RedNet Ethernet-based audio system and any MADI / AES10 setup.

RedNet A16R expands Focusrite’s range of 1U Dante interfaces with network and power supply redundancy, providing 16 channels of analogue input and output with high quality A-D and D-A digital conversion at up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network.

RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. 

The RedNet AM2 is a compact stereo monitoring unit combining a high-gain headphone amplifier with line outputs for flexible monitoring of signals from a Dante network.

RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability.

RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network.

RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. 

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces.

RedNet MP8R is an 8-channel remote-controlled microphone preamplifier and A/D for the Dante audio-over-IP network, designed specifically for the live sound/recording and broadcast environments, and

For situations in which low-latency performance is critical, such as tracking, the RedNet PCIe card provides the best possible performance for your system.

RedNet PCIeR combines extremely low latency with Ethernet redundancy, offering the best possible system performance coupled with exceptional reliability.

Four Audio's DBO1 is a Dante breakout box providing 8 analog output channels and optional 4 AES outputs or 2 AES inputs + 2 AES outputs with outstanding audio performance values.

This small 2 channel IO box based on the new Dante Ultimo solution is a cost effective but high quality solution for getting analog signals into or out from a Dante audio network without much infra

Four Audio's HD2 is a high end loudspeaker management system with 2-4 analog inputs, 1 AES input and 4-8 analog outputs.

The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.

The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.

The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.

2200W stereo amplifier. The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.

2200W three channel amplifier. The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.

The GMS 3132 Dante is a professional monitoring system for Dante networked audio systems.

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuts to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs.

The 16 inputs and outputs of the Dark1616 are parallelled in both analogue and AES for maximum flexibility, with the added benefit of huge 127d8 dynamic range analogue to digital converters (DARK1616M).

The DARK 1616M ia an audio interface that provides connections to a Dante or AES67 ip network.

The Express ip was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante network audio network.

The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.

The Glensound GSI-DARK88, when used with the Inferno, creates a self contained, network audio commentary system.

The Glensound Inferno is acommentary system for a single user or a large multi-commentator system.

The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.

From 25 years experience of creating acclaimed professional audio products, comes the latest evolution of our mic preamplifier design: the m108.

Possibly the world’s most evolved mic preamplifier, the m802 delivers functionality and performance which simply doesn’t exist in any other mic preamp design.

With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities.

With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities.

The HEDD B1 Dante module enables HEDD studio monitors to perform in Dante networks. It can be inserted into an input slot located on the back panel of each monitor.

HEDD's Type 05 studio monitor has a compact size is the ideal choice for mobile broadcast stations, recording studios, multichannel-setups, and VoIP conferences. By inserting the HEDD Dante B1 input card into the input slot located on the back of the speaker, it can be turned into a real Dante device. 

HEDD's Type 07 is a professional analog studio monitor, able to perform in Dante networks (when inserting the HEDD B1-Dante input module). 

The HEDD Type 30 is an exceptional analog midfield monitor that will satisfy professional studio needs and desires. Like the entire HEDD studio monitor Series ONE it can be turned into a powerful Dante device (all you need is the HEDD B1-Dante input module). 

The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.

The 1581NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.

The 5400ACS is an integrated announcement controller with built-in message server capability that is the core of an EN 54-16 compliance life/safety emergency notification system.

The 5401CS is a push-to-talk switch only digital microphone station. It is a network appliance with a unique IP address that requires no configuration. 

The IED 5404CS digital microphone station is a 4-button device for initiating audio / visual announcements, messages and pages with the 5400ACS Announcement Control Systems.

The DNA7814 series of amplifiers are an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.

The DNA7874 series of amplifiers are an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.

The DNA2404DH amplifier is an integral part of the IED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.

The DNA2404DL amplifier is an integral part of the IED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.

AOIPBox is an AOIP standard terminal, it can support AES67/Dante/Ravenna/Cobranet IP audio protocols.

The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only 2 rack units, the amplifier delivers a maximum burst power of about 9,000W distributed over 32 channels with 280W each.

The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only one rack unit, the amplifier delivers a maximum burst power of about 640W distributed over 32 channels with 20W each.

The D-3000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.

The DAC-288 is a digital audio transport system utilizing Audinate’s DanteTM network audio solution.  The DAC-288 connects to your network with a single Ethernet cable. It is a Dante Break Out / ecoder interface in a 2RU form factor designed for all types of commercial AV installations.

The DAC-288 is a digital audio transport system utilizing Audinate’s DanteTM network audio solution. The DAC-288 connects to your network with a single Ethernet cable.

The DASR-288 is a digital audio transport system utilizing Audinate’s Dante™ network audio solution.

The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.

The PMU-240N is a 6-Input 240 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.

The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.

The BLACKBOX BBR64-DANTE RECORDER is designed to record and replay up to 64 channels of audio data from a Dante network.

Based on JoeCo’s award-winning BlackBox Recorder technology, the new BlackBox BBR1MP Recorder is a stand-alone, live, multi-channel audio acquisition solution primarily designed with the broadcast

The new DFT-EXP Series from Joseph Electronics provides for up to 12 channels of 3G/HD/SDI uncompressed video plus four additional slots that can be fitted with a selection of other convenient modules for audio, intercom, analog video, genlock, MADI, and even Dante.

The D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional SDI, MADI, Dante™ and analog.

Providing an adaptable approach to digital audio processing, the D*AP8 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution.

The D*AP8 MAP EDITION is a multi-purpose audio device comprising of an 8 channel audio monitor, an optional comprehensive Dolby® toolkit including metadata emulation, along with loudness metering and logging capabilities. Supporting SDI, AES, MADI, Dante™ and analog I/O, the unit can handle all audio formats up to 7.1.

With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards.

Providing an adaptable approach to digital audio processing, the D*AP4 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution.

With 4 processing channels and optional logging features, the D*AP4 LM EDITION is the ideal solution for automatic and intelligent loudness management in real-time stereo TV or radio broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards.

The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including AES, SDI, MADI, Dante™ and analog.

The fully featured dual mono or stereo D*AP4 VAP EDITION contains a suite of performance enhancing and creative audio processes dedicated to extracting the maximum potential quality from voice audio with dependable consistency. Flexible I/O options include AES, analog, 3G SDI, MADI, Dante™ and high quality microphone pre-amps.

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.
 

The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels.

The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors.

KH2 speakers are part of K-array Concert Series, which includes a wide range of professional audio products serving as sound system for small, medium and big scale events. The KH2 is a revolutionary compact line array element ideal for club or a theater.

The KH2SYS6 is an incredibly compact and lightweight system perfect for intimate indoor settings with the possibility to expand for larger venues.

The KH3 is a revolutionary compact line array element for medium scale events in stadium, arenas, concert halls and theaters.

Easily transportable system featuring digital steering for outdoor venues with noise restrictions and space limitations

The KH5 is the biggest speaker of the K-array Concert Series and represents a revolutionary compact line array element for large scale events.

The KH5SYS6 is a compact solution that saves space along with transportation costs for stadium venues and large events.

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm.

The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations.

KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations.

KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm.

KMT218P is much more than a standard dual 18" powered subwoofer. It's a high performance sub-bass system designed for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations.

KR102 features a pair of KMT12 12" subs each with 2 channels of 1000 W matched to a KK102 loudspeaker with 16 x 2" Neodymium speaker elements.

KR202 is a portable PA sound system featuring a pair of KMT18 18" subwoofers each with 2 channels of 1000 W matched to two KK102, line array speakers with 16 x 2" neodymium magnetic transducers.

KR402 audio system features a pair of KMT21 21" subs each with 2 channels of 2000 W matched to two KP102 with 3. 15" Neodymium speaker elements.

KR802 features a pair of KMT218 dual 18" subs each with 2 channels of 2500 W matched to two KY102 with 4" Neodymium speaker elements.

The KRX202 is composed of two KX12 speakers coupled with a pair of KMT18 18" subwoofers and includes an extendable pole and proper joining and stacking hardware.

The KRX402 is composed of four KX12 line array elements paired with two KMT21 Mark I  21" subwoofers and includes an extendable pole and dedicated hardware for joining, stacking and flying the system.

The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware.

The K-array KS5 is a self-powered subwoofer system. It is best suited for high-powered, extended bass response applications in arenas, theatres, stadiums, concert halls, houses of worship and outdoor events.

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging

KE1600B is a four channel intelligent power amplifier.

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging

Kevic DN2124 is a Dante digital processor.

Kevic DN2144 is a Dante digital processor.

Kevic DN3124 is a Dante digital processor.

Kevic DN3124B is a Dante digital processor.

Kevic DN3144 is a Dante digital processor.

Kevic DN3144B is a Dante digital processor.

The Kevic MA3212 is a Dante Digital Power Amplifier.

The Kevic MA3224 is a Dante Digital Power Amplifier.

The Kevic MA3232 is a Dante Digital Power Amplifier.

 

Combining the fastest convolution algorithms and our 3D audio technology, KLANG:fabrik makes interactive 3D personal in-ear monitoring sound for musicians possible.

KLANG:quelle is a 4 output Dante™ headphone amp that integrates 2 devices in 1 - the combination of a valuable Dante™ enabled digital-analog converter and the professional 4-channel headphone amp. 

KLANG:vier supports individual 3D in-ear mixes for 4 musicians. You can plug in your 1/4'' headphone jacks during rehearsal or use the DB-25 break-out interfaces for your radio transmitters on stage. 

The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or

The DN9650 Network Bridge allows all Midas digital consoles and MIDAS digital I/O hardware, KLARK TEKNIK DN9696 High Resolution Audio Recorders and many other AES50 devices to connect to many diffe

The DN9652 Dual Network Bridge has been designed to allow two dissimilar digital audio networks to interface simply and reliably.

The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges.

The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations.

The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations.

The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations.

The K&F PLM 12k44 and K&F PLM20k44 are specifically designed for live performances and touring. These models cover different performance classes and come with a variety of innovations.

The K&F PLM 12k44 and K&F PLM20k44 are specifically designed for live performances and touring. These models cover different performance classes and come with a variety of innovations.

The “VIDA L” model is a scalable, controllable and full-range-compatible line array system.

The G2 audio engine hosts a DSP farm powerful enough for 32 equalizers, 32 dynamics, up to 256 mixing channels and a 64 x 64 mix minus matrix. 

GRAPHITE TWO consoles are extremely versatile as they can be configured either as stand-alone or as networking consoles. 

The DA230 is a fully digital 2-channel class D amplifier with 1500W@4ohm output power per channel. It features a high performance DSP offering extensive features like matrix router, crossovers, parametric EQs, delays, limiters and much more.

The DA428 is a fully digital 4-channel class D amplifier with 700W@4ohm output power per channel. It features a high performance DSP offering extensive features like matrix router, crossovers, parametric EQs, delays, limiters and much more.

The Kramer FC−404Net is a four−input/four−output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.

PA−150NET is a high−performance amplifier with both Dante™ and local inputs. 

PA−225NET is a high−performance amplifier with both Dante™ and local inputs.

The four-channel speaker controller plug-in module with digital signal processing for the amplifiers of KS series CA4D und TA4D. A unique and convincing solution for perfect sound and simple handling with DANTE option.

4-channel power amplifier for F MOD with optional DANTE interface card. A unique solution for all applications in the field of professional sound reinforcement. From a linear 4-channel power amplifier to a “digital controlled multiway PA system”, any conceivable configuration is available simply by channel-wise program change or exchange of a controller module on the front.

D 120:4L combines 12000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.

D 200:4L combines 20000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.

D 80:4L combines 8000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.

The LM 26 provides a two input/six output analog configuration that is ideally suited for multi-way loudspeaker crossover, delay and EQ functions.

The LM 44 is a powerful, full-featured digital audio system processor based on the highly acclaimed Lake Processing technology.

The two-input, four-output PLM 10000Q seamlessly integrates networked digital signal distribution, drive processing, power amplification, and load verification plus performance monitoring in a sing

The PLM 14000 extends the PLM Series with a two-input, two-output power platform optimized for high-power requirements, making it ideal for demanding subwoofer and low-end applications with loading

Powered Loudspeaker Management (PLM) has revolutionized live event audio with its seamless fusion of renowned Lake® processing with an amplifier platform based on the power density, sonic purity, a

Now packaged in an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 12K44 sets the benchmark for Powered Loudspeaker Management Systems.

Now offering an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 20K44 sets the benchmark for Powered Loudspeaker Management Systems.

The ADX-120 Networked Announce / Talkback unit provides a fully-featured solution for television and radio announce booths. All required functions are included, including support for RTS format two-wire PL and IFB beltpacks. The ADX-120 is widely used in high-end sports and entertainment broadcast events. See lancedesign.com for more information.

The ADX-140 XLR Interface panel provides four mic/line inputs, two wet/dry IFB outputs, and two RTS-format PL channels in a network-connected 1RU unit. Applications include broadcast announce booths, interview positions, locker rooms, etc.

The ADX-2400D is the AES version of the ADX system head-end unit. It provides the network interface for 24 channels of AES digital audio in each direction (inputs and outputs).

The ADX-8000 is a layer-2 Ethernet Switch and redundant power supplies for use with ADX-120 announce units and ADX-140 XLR Interface units. It provides highly-reliable Ethernet connections over single-mode ST fiber ports, and fully-redundant power for the ADX-120s.

The DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels.

The DNT16i processor provides inputs into a Dante network from analog and digital signals.

The DNT22 I/O Interface is a 2-in / 2-out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system.

DNTBOB 88 is a high quality, general purpose 8-in / 8-out interface to transmit and receive line level analog audio signals via a Dante network.

The DNTWP Dante™ Audio Interface is a cost effective multi IO wall box. The unDX2IO features two balanced mic/line XLR inputs and two balanced XLR line outputs.

This DSP processor operates as a native Dante device and a native ASPEN device to enable signal routing and processing in and out of the Dante and ASPEN digital matrices.

DAC-OBiA is designed for converting digital audio signal to analog audio signal up to 32 channels.

DCAP-OBiA is the world’s first OBIA processor compliant with DCI/SMPTE Standard and FIPS-140 Level Security.

The Linea Research 44M06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms.

The Linea Research 44M10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M10-DANTE delivers 2500W per channel into 2 Ohms , 2500W per channel into 4 Ohms, 1500W per channel into 8 Ohms.

The Linea Research 44M20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms.

The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs. 

The D10-2-DANTE (D Series) represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.

The D14-2-DANTE (D Series) represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.

The Aurora 16-DNT AD/DA converter provides world-class analog to digital and digital to analog conversion in a compact one-rack space format enabled for Dante audio networks. With sample rates up to 192 kHz, Aurora offers wide, open, uncompressed and unequalized audio for studios, mastering facilities, remote recording, broadcast and production. 

The Lynx Aurora 8-DNT is an Aurora 8 combined with a factory installed LT-DANTE interface LT card. The Aurora 8-DNT features 8 channels of up to 24 Bit/192 kHz Mastering Quality analog to digital and digital to analog conversion in single-rack space with an on-board 16 Channel Digital Mixer Providing Flexible I/O Routing.

Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touch-screen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features.

LT-DANTE LSlot interface for its Lynx Aurora and Hilo converters. The LT-DANTE is a Dante™ enabled expansion card for audio networking that connects Hilo and Aurora with other Dante-enabled products over Ethernet-based networks. This can be purchased factory installed into Hilo, Aurora 8 and Aurora 16 converters as Hilo-DNT, Aurora 8-DNT and Aurora 16-DNT respectively. The LT-DANTE can also be purchased separately to be used in any Hilo or Aurora converter.

AXIS is a flexible, modular digital mixing system with unmatched speed, visibility and customization.

 

 

The Mackie DL 32 Expansion card connects the DL32R 32-Channel Digital Live Sound mixer to any Dante-enabled network.

The DL32R™ delivers 32-channels of powerful digital mixing that’s completely controlled wirelessly from the intuitive Master Fader™ iPad® app, freeing you to get in the mix like never before.

The new Dante Module provides up to 4 network ports with 64 mono channels each. Therefore one module can handle up to 256 audio signals.

The audio matrices IDEA developed and manufactured by Mandozzi Elettronica SA are ideal for all customers who are looking for systems that perform more than just simple X/Y connections, but intelli

MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. 

CDD-LIVE 12 is a high-performance, self-powered system designed for applications that require high output levels and exceptional fidelity from a very compact enclosure. It incorporates a two-channel Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks.

CDD-LIVE 15 is a self-powered two-way system designed for live applications and installations that demand the ultimate in sonic performance from a single enclosure. It incorporates a two-channel Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks.

CDD-LIVE 8 is an ultra-compact, self-powered, two-way system suitable for small-medium scale sound reinforcement, AV presentations and HoW to distributed systems, frontfill/infill and use as a micro stage monitor. It incorporates a two-channel Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks.

CSX-LIVE 118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE full-range system to 35Hz — providing exceptional low frequency impact and increasing headroom. It incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks.

CSX-LIVE 218 achieves the ultimate in subwoofer performance for the most demanding professional applications – delivering very high output levels and superb transient performance with minimal distortion. A self-powered system, CSX-LIVE 218 incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks.

This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems.

Attend Sixteen is a robust a robust all-in-one solution for multichannel video capture, recording and streaming with multiple audio tracks.

MAS Pro Dante is designed to ensure maximum reliability for demanding live entertainment and attraction audio playback, as well as for centralized playback and control of large amount of audio channels in museums or showrooms.

The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks.

The M32 is a live performance and studio recording digital console with up to 40 simultaneous input channels.

The 40-input, 25-bus M32C takes the brain of the flagship M32 Digital Mixing Console and packs it all into a high-performance aluminium and steel 1U form factor.

Digital Console for Live and Studio with 40 Input Channels, 16 MIDAS PRO Microphone Preamplifiers and 25 Mix Buses

It’s the way to add Millennia preamps to your Dante network.  Any HV-3D ever made can have this option installed (digital option required). RedNet compatible.

It’s the way to add Millennia preamps to your Dante network.  Any HV-3R ever made can have this option installed (digital option required). RedNet compatible

The Millennia HV-3D is an 4-channel version of the very successful and popular HV-3C stereo preamp.

Eight channels of the acclaimed Millennia HV-3 mic preamp circuits. It’s the way to add uncolored preamps to your Dante network.

Eight remote controllable channels of the acclaimed Millennia HV-3 mic preamp circuits. It’s the way to add uncolored preamps to your Dante network.

The digital mixer DMIX-20 from IMG STAGELINE impresses with an intuitive operating concept of the well thought-out user surface. Due to the compact design, it is also ideally suited for applications on smaller to medium-sized stages and for your home studio. The device quickly impresses musicians, DJs and live sound mixers. Combined with an external router, the DMIX-20 also allows for a convenient operation via iPad using a network connection. The free app can be downloaded from the app store. 

The DMIX-20DANTE is a module for integrating the digital mixer DMIX-20 into a Dante™ network.

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel.

XIRIUM PRO RX-Dante module allows the base receiving the wireless signal to connect to a Dante network providing the highest possible sound quality, reliability, and outstanding performance in one unique solution.

XIRIUM PRO RX-Dante module allows the TX base to send the signal from a Dante network wirelessly to an RX base, providing the highest possible sound quality, reliability, and outstanding performance in one unique solution.

XIRIUM PRO combines digital transmission facilitating the highest possible sound quality, reliability, and outstanding performance in one unique solution.

XIRIUM PRO combines digital transmission facilitating the highest possible sound quality, reliability, and outstanding performance in one unique solution.

TalkShow enables any television or live video producer to easily reach 300 million monthly connected Skype users and incorporate into live programs with Skype video calls.

TriCaster Advanced Edition boosts TriCaster's core broadcast "studio-in-a-box" systems with groundbreaking new production techniques, without additional equipment purchases.

The DTD is a unique tool, combining advanced signal processing, inherited from the NXAMP, whith an unmatched easyness of use.

The DTD is a unique tool, combining advanced signal processing, inherited from the NXAMP, whith an unmatched easyness of use.

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). 

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). 

The NXDT104 card allows NEXO NX amplifiers to interface with a Dante network. This allows for a NEXO loudspeaker system to talk directly to a Yamaha CL mixing console via Dante.

Featuring groundbreaking implementations such as Bitproof Support and the revolutionary Dante Interface, the N7000C is the most advanced technology in the field of professional audio hardware, while fully supporting the well-established high quality industry standards and providing the archive community with additional tools.

PENTA 720 is a 2U modular audio interface with up-to 16 SDI/HD/3G embedder-deembedder interfaces providing 256 channels of Audio I/O.

PENTA 721 is a compact 1U digital audio interface with 8 AES/EBU I/O channels, 3 MADI coaxial or optical I/O, 64 channels IP Audio Ethernet I/O powered by Dante and an interface for Avid Pro Tools

PENTA 725 IP audio router is a 1024 x 1024 cross points TDM router matrix with 64 bi-directional channels over IP Ethernet powered by Dante, 64 AES3 I/O channels and 6 optical MADI and Double MADI

Pan Beam PB 04 is a column speakers with a slim, appealing design. The PB 04 can generate an single beam, to set the focus on a listening area.

The Pan Beam PB 08 is a slim line speaker in an appealing design. The Pan Beam PB 08 can generate two independent beams, to get an optimal sound coverage on the listing area.

The Pan Beam PB 16 is a slim line speaker in an appealing design. The Pan Beam PB 16 can generate four independent beams, to get an optimal sound coverage on the listing area.

The PB S-208 is an active subwoofer incl. DSP and network functionality. The PB S-208 is the low extension of the Pan Beam family. It is characterized by an unobtrusive design and a genuine and deep bass response. The PB S-208 can be operated in various cardioid applications.

The WP-DN360 is a digital amplifier with high efficiency and high reliability design. 

The WP-DN700 is a digital amplifier with high efficiency and high reliability design. 

The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation.

Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700.

The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems.

The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems.

The Audinate DLM is the Dante® Legacy Module. Built as a drop-in replacement for the Cirrus Logic CobraNet CM-1 module. It is available for customers who would like to transform their NION® with CobraNet to a NION with Dante.

Built on an architecture designed for stable, efficient and robust performance, NION® n3 and n6 feature a 448-channel high speed digital audio bus for seamless expandability.

Built on an architecture designed for stable, efficient and robust performance, NION® n3 and n6 feature a 448-channel high speed digital audio bus for seamless expandability.