Dante-enabled Products

The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®.

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.

Dante interface card for Calrec’s Hydra2.

E-DANTE64-HX is a Dante interface card for the Eclipse HX matrix systems (Omega, Median and Delta). It supports DANTE and is AES67 compatible, allowing users to transport up to 64 channels of high quality audio to multiple Dante-enabled devices using standard Ethernet network infrastructure

Cloud’s CA Series Dante Cards are available in three models – CDI-CA2, CDI-CA4, and CDI-CA8

Features:

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CA8) or 100Mbps Ethernet (CDI-CA2 / CDI-CA4)

• Dante redundancy or Ethernet […]

Cloud’s CV Series Dante Cards are available in three models – CDI-CV2, CDI-CV4, CDI-CV8

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CV8) or 100Mbps Ethernet (CDI-CV2 / CDI-CV4)

• Dante redundancy or Ethernet switch modes […]

16×16 Dante 16 channel input 16 channel output option license for the 9904-UDX openGear card.

AX32 already support 64 channels of Dante IP Audio via an optional module, but in an effort to meet demand for an even higher channel count, our an optional expansion card adds another 128 channels to your digital audio-routing matrix.

The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. […]

The XC2 Dante IP Audio Interface is an internal module for all 52/XC2 cores, 52/XC2 concentrators and 52/XS2 cores. 

The DHD XC Dante interface can be used with all currently available DHD broadcast consoles and routers. 

Dante Interface Card for DiGiCo ORANGE BOX I/O Interface and the SD12, S21 and S31 mixers.

DiGiCo’s DMI-Dante 64@96 card is a Dante Interface Card for its 4REA4, S-Series and select SD-Range sound consoles (SD12 and SD7 Quantum). Providing 64 input and 64 output channels at both 48KHz and 96kHz, the new DMI (DiGiCo Multichannel Interface) card is equipped with Primary and […]

This card provides 64 inputs and 64 outputs to the Dante network at both 48kHz and 96kHz.
– 2 EtherCON Ports
– 1 RJ45 Port
– Switched mode switches the ports together
– Redundant mode allows the ports to work as a redundant pair
– Inbuilt SRC between 48kHz and 96kHz
– Compatible with S-Series, Quantum Range, SD12, Orange Box and 4REA4

The DigiCo SD-Dante-8 Module offers 8 input and 8 output channels when added to DigiGo SD racks, including the SD-Rack, SD-Mini Rack, and SD-Nano Rack. These racks support DiGiGo’s SD consoles including the  various versions of the SD5, SD7, SD8,  SD9, SD10 and SD11 consoles.

The Digital Audio Labs Livemix LM-Dante-EXP allows the Livemix Personal Mixer to integrate seamlessly with a Dante audio network as part of the Livemix Personal Monitoring System.