Dante Interface Cards Archives | Audinate

Dante-enabled Products

Dante Interface Cards
Digitclass – DNET-DANTE

The DNET-DANTE is a Dante® Audio Networking Interfaces for integration into Digitclass equipment and is designed to provide OEM product developers a cost-effective way to incorporate Dante connectivity into a wide variety of products.

Dynacord – RCM-28

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. 

ELAN – EL-IPD-NAC-EXT

Dante Network Audio Card for ELAN network amplifiers.

Electro-Voice – NetMax Dante Audio Module DM-1

32 in, 32 out Dante interface card for EV Netmax

Electro-Voice – RCM-28

The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net.
The RCM-28 remote control module is the first EV product to support […]

Electro-Voice – RCM-28

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and […]

K-array – K-dante

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.
 

Kingray – MDT22-E1

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment […]

Kingray – MDT22-E2

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment […]

Kingray – MDT44-E1

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment […]

Kingray – MDT44-E2

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment […]

Klark Teknik – DM80-DANTE

The DM8-Dante is a Dante Expansion Module with 16 x 32 Channels, Additional ULTRANET Audio Networking and Ethernet Connectivity

Dante* expansion module for KLARK TEKNIK DM8000 etc. featuring Dante and ULTRANET audio networking
Expands the processing benefits of DM8000 to third-party systems
Dante enabled audio networking enables up to 16 input and 16 output channels […]

Klark Teknik – DN32-DANTE

The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks. Based on information technology standards, Dante provides uncompressed, multichannel digital media networking, with low latency and synchronisation. By focusing on flexible […]

Klark Teknik – KT-DANTE64

The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges.

Klark Teknik – NM-DANTE32

Audinate dante legacy module with up to 32 bidirectional channels. Primary and secondary Ethernet interfaces for dual-redundant Dante networking. Optional Dante Controller software for remote configuration (PC or Mac computer).

Audinate Dante Legacy Module in Cirrus Logic CobraNet CM-1 format
Up to 32 bidirectional channels at 48 kHz and 16 bidirectional channels at 96 kHz […]