I/O Interfaces Archives | Audinate
AEQ – NetBOX 32 AD

NETBOX 32 AD interface features 32 input and 32 output channels organized in 16 mono analog + 8 stereo digital channels. The stereo digital audio channels can be configured as AES/EBU or SPDIF standard. It also incorporates 16 GPI and 16 GPO (each GPO connector includes a power supply pin to feed the output circuitry).

AEQ – NetBOX 4 MH

The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network.

AEQ – NetBOX 8 AD

NETBOX 8 AD inferface features 8 inputs and 8 outputs, organized in 4 mono analog and 2 digital stereo channels. Stereo digital ones can be configured as AES/EBU or SPDIF standards. The second digital stereo channel can also be switched to a USB connector to ease the connection to an audio workstation. It also provides […]

Alcorn McBride – V-Com VC32K

The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob.

Alcorn McBride – V-Page VP12X

The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules […]

Alcorn McBride – V-Page VP16K

The VP16K is a paging station kit that allows you to create customized paging consoles with up to 16-zones of control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a panel-mount 5-pin XLR harness to interface to a microphone.  The included IOBB interface allows the station […]

Alcorn McBride – V-Page VP16PCB

VPage provides facility-wide intelligent paging using Dante audio networks.

Alcorn McBride – V-Page VP32K

The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness.

Alcorn McBride – V-Page VP4

V-Page provides facility-wide intelligent paging using Dante audio networks.

Alcorn McBride – V-Page VP4M

V-Page provides facility-wide intelligent paging using Dante audio networks.

Alcorn McBride – V-Page VP4X

The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long […]

AllDSP – DBB-1212

Stand alone 12 input 12 output Dante connection. Featuring four analog, four AES/EUB and four Dante inputs. With flexible routing to four analog, four AES/EUB and four Dante outputs, over an eight channel matrix (four in, four out). Ready to go with all the benefits of Dante like discovery, pass though generic routed networks etc. […]

Allen & Heath – AHM-64

AHM-64 is a powerful 64×64 Audio Matrix Processor supported by a comprehensive ecosystem of scalable I/O, control and Dante solutions. Designed to excel in corporate, retail, hospitality and education environments, AHM-64 allows integrators to quickly create systems that build from a single boardroom to a complete campus.

Allen & Heath – DT164-W

DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation. 

Allen & Heath – DT168

The DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any SQ or dLive Dante network.