I/O Interfaces Archives | Audinate
ARX – Network DI

The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.

ASL – ENCHORUS ENC 1101

The ENCHORUS ENC 1101 Dante™-based audio network module offers eight AES3 outputs with individual delay (at a maximum of 2.7 seconds) and four AES3 inputs, with a four-band equalizer on each input and output. The ENC 1101 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control […]

ASL – Enchorus ENC 1102

The ENCHORUS ENC 1102 Dante™-based audio network module offers six AES3 outputs and six AES3 inputs with a four-band equalizer on each input and output. The ENC 1102 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control and monitor through a web interface. A built-in […]

ASL – Enchorus ENC 1201

The ENCHORUS ENC 1201 Dante™-based audio network module offers eight high dynamic range (HDR) microphone inputs and four line outputs. Each microphone input has four splitters with individual trim, mute, phase reverse, and a 4-band equalizer. The dynamic range of each microphone amplifier is more than 152dB.
A four-band equalizer is also provided for each […]

ASL – Enchorus ENC 1202

The ENCHORUS ENC 1202 Dante™-based audio network module offers eight line outputs with individual delay (at a maximum of 2.7sec.) and four line inputs, with a four-band equalizer on each input and output.
The ENC 1202 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control […]

Asystems – DT88

Asystems’ DT88 is an 8×8 Dante interface card. Asystems offers four audio networking options for network-enabled devices including the DMP, DMA and NT series. These Asystems products, combined with any of these Networking solutions, provides flexible, large-scale operation in all modern commercial installations. Dante Networking cards are available as standard on “D” models of the […]

ATEN – VE66DTH

ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network

AtlasIED – BB-EB1616DT

The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.

Attero Tech by QSC – Axon D2FLEXio

The D2FLEXio provides cost effective analog audio connectivity for installed AV systems.
Features

Dual analog flex I/O, selectable via recessed slide switches (2×0, 1×1, 0x2)
I/O trim potentiometers for accommodating “pro” and “consumer” audio line levels
44.1, 48, 88.2, 96 kHz, 24 bit audio conversion to and from a Dante™ network
Small form factor with […]

Attero Tech by QSC – Synapse D16Mio

The Synapse D16Mio is a 16 Channel I/O 1RU Dante™ / AES67 interface.
Features

16 studio-grade mic preamps with line level capability as well
Front panel network control of mic preamp gain, phantom power, mic/line input sensitivity
16 line level balanced outputs with front panel or network level control
Useful for studio, live, rental and […]

Attero Tech by QSC – Synapse D32i

The Synapse D32i is a 32-channel line input audio interface to Dante.

Attero Tech by QSC – Synapse D32o

The Synapse D32o is a Dante™/AES67 networked audio interface with 32 line level analog outputs.
Features

32 line level balanced outputs with front panel for network level control
Pair with the Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
Software controllable output matrix routing
Supports Dante™-AES67 […]

Attero Tech by QSC – unD32

This product has reached end of life
The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations.

Attero Tech by QSC – unD3IO

This product has reached end of life
The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

Attero Tech by QSC – unD4I

This product has reached end of life
The unD4I 4-input Dante interface is a convenient, cost-effective way to add mic/line inputs to an existing Dante-based networked audio system.