Microphones Archives | Audinate
Audio-Technica – ATND933H

The ATND933H hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica – ATND933ML

The ATND933ML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. 

Audio-Technica – ATND933WC

The ATND933WC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica – ATND933WH

The ATND933WH hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica – ATND933WML

The ATND933WML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica – ATND971

Audio-Technica has bridged the gap between audio and IT with the first wired microphones that transmit audio and control data together over the Dante network protocol. A simple Ethernet connection allows the Network Microphone to communicate across an existing network of Dante-enabled devices and, with the mic’s integrated, programmable user switch, control any of those […]

Audio-Technica – ATND971a

Audio-Technica’s ATND971a is a Cardioid Condenser Boundary Microphone with Dante™ Network Output.

Audio-Technica – ATUC-IRCUDAN

The 19″ rack-mountable ATUC-IRCUDAN allows for the use of both infrared and wired discussion units, providing 24-bit/48 kHz digital signal processing (with 12-band feedback suppressor), automated gain control (AGC), mic gain and mic EQ for each connected discussion unit. It can be operated locally, through the Web Remote interface (no software required), or third-party IP […]

Audio-Technica – ATUC-IRCUDAN

The 19″ rack-mountable ATUC-IRCUDAN allows for the use of both infrared and wired discussion units, providing 24-bit/48 kHz digital signal processing (with 12-band feedback suppressor), automated gain control (AGC), mic gain and mic EQ for each connected discussion unit. It can be operated locally, through the Web Remote interface (no software required), or third-party IP […]

Audio-Technica – ATW-DR3120DAN

新開発の独自コーデックを搭載した
最大10波を同時運用可能なDante出力付き高音質デジタルワイヤレスシステム

Audix – M3

The M3 is an innovative, tri-element hanging ceiling microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance.

Audix – M55WD

The M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices. 

Installing the M55 requires just one […]

Audix – M70WD

The M70WD is a steerable, flush-mount condenser microphone designed for distance miking in a variety of applications, including video conferencing, distance learning, hospital rooms, surveillance, and ambient room miking. The flush-mount configuration and a footprint of only three inches in diameter allow the M70WD to virtually disappear.

The M70WD capsule is housed within a patented […]

BARE – D-8

D-8 is a desktop microphone base with Dante function. It is suitable for quick installation of any XLRM Cannon head output gooseneck microphone. The microphone base is equipped with a capacitive induction tact switch and is equipped with a red / green LED indicator. . In local mode, the user can switch the microphone to mute […]

BARE – DCS-10C/D

Features:
Adopt all-digital conference technology, in line with IEC60914
international standard;
The exquisite and minimal structure design highlights the modern atmosphere
and conforms to ergonomics;
Brand new dual microphone design, longer pickup distance and wider
range;
Special electret capacitive single microphone core design, clear and bright
sound quality, high sensitivity;
Original microphone directivity variable technology, […]

BARE – DCS-201C/D

1.
Exquisite and elegant design, ergonomic, very modern.
2. Original D-net IOT digital conference IoT system technology, in line
with IEC60914 international standard
3. With priority button function, you can turn off the representative unit
that is speaking.
4. The microphone is equipped with an ultra-quiet electronic touch switch,
which can avoid the mechanical sound […]