Productos de Attero Tech by QSC, equipados con Dante

Attero Tech by QSC – Axon D2FLEXio

The D2FLEXio provides cost effective analog audio connectivity for installed AV systems.
Features

Dual analog flex I/O, selectable via recessed slide switches (2×0, 1×1, 0x2)
I/O trim potentiometers for accommodating “pro” and “consumer” audio line levels
44.1, 48, 88.2, 96 kHz, 24 bit audio conversion to and from a Dante™ network
Small form factor with […]

Attero Tech by QSC – Synapse D16Mio

The Synapse D16Mio is a 16 Channel I/O 1RU Dante™ / AES67 interface.
Features

16 studio-grade mic preamps with line level capability as well
Front panel network control of mic preamp gain, phantom power, mic/line input sensitivity
16 line level balanced outputs with front panel or network level control
Useful for studio, live, rental and […]

Attero Tech by QSC – Synapse D32i

The Synapse D32i is a 32-channel line input audio interface to Dante.

Attero Tech by QSC – Synapse D32o

The Synapse D32o is a Dante™/AES67 networked audio interface with 32 line level analog outputs.
Features

32 line level balanced outputs with front panel for network level control
Pair with the Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
Software controllable output matrix routing
Supports Dante™-AES67 […]

Attero Tech by QSC – Synapse DM1

The Synapse DM1 is a Dante™/AES67 Rackmount audio monitor.
Features

Supports easy monitoring of 32 Dante™ channels in standard monitoring mode and 128 subscription based monitoring channels in extended mode
Transmits local analog audio channels and selected monitor audio channel to Dante™
Supports Dante™-AES67 Interoperablity Mode
Easily assignable front panel headphone and integrated speakers for […]

Attero Tech by QSC – unD32

This product has reached end of life
The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations.

Attero Tech by QSC – unD3IO

This product has reached end of life
The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

Attero Tech by QSC – unD4I

This product has reached end of life
The unD4I 4-input Dante interface is a convenient, cost-effective way to add mic/line inputs to an existing Dante-based networked audio system.

Attero Tech by QSC – unD4I-L

The unD4I-L four input Dante interface is the ideal device for adding mic/line inputs to a Dante system. The addition of four logic inputs and four logic outputs allows easy interface with microphone switches and indicator LEDs. The unD4I-L features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. […]

Attero Tech by QSC – unD4O

A 4-output Dante interface that is a convenient, cost-effective way to add line-level outputs to an existing Dante-based networked audio system.
OUTPUT – 3-pin depluggable connectors with line-level analog output.
INDICATORS – Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshooting.
CONTROL – Audio flow assignment is controllable via the […]

Attero Tech by QSC – unD6IO

A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.
INPUTS – 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software. […]

Attero Tech by QSC – unD6IO-BT

The unD6IO-BT is the latest addition to Attero Tech’s innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive. The unD6IO-BT also sports a 3.5mm stero analog input, stero RCA analog inputs, a 3.5mm stereo analog output, […]

Attero Tech by QSC – unDAES-O

This product has reached end of life
The unDAES-O is a small, cost-effective interface that bridges a Dante network directly to AES3 digital audio outputs, keeping the audio signals in the digital domain. The unDAES-O supports four AES3 output channels at a 44.1/48kHz sampling rate, or two channels at 88.2/96kHz. The unD4I has two network […]

Attero Tech by QSC – unDIO2x2+

The unDIO2x2+ I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of DanteTM audio to any Dantebased networked audio system. The unDIO2x2+’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed – near the audio source or sink thereby eliminating […]

Attero Tech by QSC – unDNEMO

An audio monitoring solution aimed at providing end users with a simple solution for selection and monitoring of up to 64 Dante audio channels.
OUTPUTS – User selectable reception of one of up to 64 Dante audio channels.
INPUTS & OUTPUTS – Internal monitoring speaker and built-in microphone.
CONTROL – Volume, channel, source select and […]