Products from Attero Tech by QSC, Powered by Dante

Attero Tech – Axon DBU

The Attero Tech by QSC unDIO2x2+ is a Dante network audio interface allowing users to integrate up to 2 x 2 mic/line channels of Dante audio into networked AV systems like the Q-SYS Ecosystem. The unDIO2x2+ features PoE power capability and a small form factor that makes it easy to put Dante connectivity wherever it’s needed – near the audio source or sink, eliminating the need for costly and interference-prone analog wiring.

Attero Tech by QSC – Axon D2FLEXio

The D2FLEXio provides cost effective analog audio connectivity for installed AV systems.
Features

Dual analog flex I/O, selectable via recessed slide switches (2×0, 1×1, 0x2)
I/O trim potentiometers for accommodating “pro” and “consumer” audio line levels
44.1, 48, 88.2, 96 kHz, 24 bit audio conversion to and from a Dante™ network
Small form factor with […]

Attero Tech by QSC – Axon DTH1620

The Attero Tech by QSC DTH1620 is multi-channel, low-power (16-channel x 20 watts) Dante/AES67 network amplifier, designed for themed entertainment usage and other specialized audio applications, and optimized for integration into the Q-SYS Ecosystem.

Attero Tech by QSC – D2i

The Attero Tech by QSC Axon D2i is a single-gang, Dante/AES67 network audio I/O wallplate for network AV systems, including the Q-SYS Ecosystem. With two balanced mic/line inputs in a cost-effective form-factor, it provides easy integration of analog devices into a wide range of network audio applications. A Q-SYS Extension further simplifies integration, letting integrators quickly add the Axon D2i to Q-SYS installations without the need for any programming.

Attero Tech by QSC – Synapse D16Mio

The Synapse D16Mio is a 16 Channel I/O 1RU Dante™ / AES67 interface.
Features

16 studio-grade mic preamps with line level capability as well
Front panel network control of mic preamp gain, phantom power, mic/line input sensitivity
16 line level balanced outputs with front panel or network level control
Useful for studio, live, rental and fixed installations […]

Attero Tech by QSC – Synapse D32i

The Attero Tech by QSC Synapse D32i is a high-performance, networked audio interface supporting Dante with AES67 interoperability. The D32i features 32 channels of balanced line level inputs, capable of accommodating line level consumer and/or professional analog audio devices. All inputs are available independently for routing from the Dante / AES67 network audio interfaces.

Attero Tech by QSC – Synapse D32i

The Synapse D32i is a 32-channel line input audio interface to Dante.

Attero Tech by QSC – Synapse D32o

The Synapse D32o is a Dante™/AES67 networked audio interface with 32 line level analog outputs.
Features

32 line level balanced outputs with front panel for network level control
Pair with the Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
Software controllable output matrix routing
Supports Dante™-AES67 Interoperablity Mode for […]

Attero Tech by QSC – Synapse DM1

The Synapse DM1 is a Dante™/AES67 Rackmount audio monitor.
Features

Supports easy monitoring of 32 Dante™ channels in standard monitoring mode and 128 subscription based monitoring channels in extended mode
Transmits local analog audio channels and selected monitor audio channel to Dante™
Supports Dante™-AES67 Interoperablity Mode
Easily assignable front panel headphone and integrated speakers for confidence monitoring […]

Attero Tech by QSC – unD32

This product has reached end of life
The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations.

Attero Tech by QSC – unD3IO

This product has reached end of life
The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

Attero Tech by QSC – unD4I

This product has reached end of life
The unD4I 4-input Dante interface is a convenient, cost-effective way to add mic/line inputs to an existing Dante-based networked audio system.

Attero Tech by QSC – unD4I-L

The unD4I-L four input Dante interface is the ideal device for adding mic/line inputs to a Dante system. The addition of four logic inputs and four logic outputs allows easy interface with microphone switches and indicator LEDs. The unD4I-L features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. […]

Attero Tech by QSC – unD4O

A 4-output Dante interface that is a convenient, cost-effective way to add line-level outputs to an existing Dante-based networked audio system.
OUTPUT – 3-pin depluggable connectors with line-level analog output.
INDICATORS – Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshooting.
CONTROL – Audio flow assignment is controllable via the Dante network connection.

Attero Tech by QSC – unD6IO

A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.
INPUTS – 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software. […]