BARE, licensee of Audinate's Dante Pro AV Networking Technology

Products from BARE, Powered by Dante

BARE – AD-48

The digitally guided full-frequency sound column adopts a multi-channel high-current digital power amplifier with advanced dedicated coaxial transducers, and each transducer is equipped with a high-frequency array of three tweeters. “Array in an array” three tweeter designs shorten the distance between high-frequency sources, thereby greatly improving high-frequency performance through a continuous and wide horizontal distribution. […]

BARE – AD-48

Features:
1. It has high efficiency and high sound energy output, excellent sound
quality, perfect protection function and good electromagnetic compatibility
characteristics.
2. Array full-frequency sound column with network transmission and pure
digital power amplifier. (Equipped with special independent speaker control
software), adjust the direction and angle of direct sound (pre-set 0°, ±15°,
±45°, ±60°, […]

BARE – AF-6E

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, […]

BARE – AF-8E

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, […]

BARE – AF-D Series

AF-D series network active speaker is an active full-range speaker that integrates network transmission, pure digital power amplifier and RS-232 control and monitoring. With high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. It has a backup analog input interface and a Dante network interface, and the transmission is dual-backup. A built-in Dante board can be connected through a network cable to implement network audio signal transmission. The router automatically assigns an IP address through the DHCP of the router, and performs signal transmission with the audio matrix with Dante function in the local area network, and can easily set up a fully digital network sound reinforcement system.

BARE – BE-0404D

The
network audio processing center is a network audio processor with 8 inputs (4
analog and 4 digital) and 8 outputs (4 analog and 4 digital), using the
industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can
reach 450MHz. The input and output modules of DSP can be customized according
to the actual situation. […]

BARE – BE-0808D

The
network audio processing center is a network audio processor with 16 inputs
(8 analog and 8 digital) and 16 outputs (8 analog and 8 digital), using the
industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can
reach 450MHz. The input and output modules of the DSP can be customized
according to the actual […]

BARE – BE-0812D

The
network audio processing center is a network audio processor with 16 inputs
(8 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the
industry-leading ADI DSP SHARC21489, the highest The working frequency can
reach 450MHz. The input and output modules of the DSP can be customized
according to the actual […]

BARE – BE-1208D

The
network audio processing center is a network audio processor with 20 inputs
(12 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the
industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can
reach 450MHz. The input and output modules of the DSP can be customized
according to the actual […]

BARE – BE-1212D

The
network audio processing center is a network audio processor with 20 inputs
(12 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the
industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can
reach 450MHz. The input and output modules of the DSP can be customized
according to the actual […]

BARE – BE-1608D

The
network audio processor is a network audio processor with 32 inputs (16
analog and 16 digital) and 24 outputs (8 analog and 16 digital), using the
industry-leading ADI DSP SHARC21489, The highest operating frequency can
reach 450MHz. The input and output modules of the DSP can be customized
according to the actual situation. At […]

BARE – BE-1616D

The
network audio processor is a network audio processor with 32 inputs (16
analog and 16 digital) and 32 outputs (16 analog and 16 digital), using the
industry-leading ADI DSP SHARC21489 chip , The highest operating frequency
can reach 450MHz. The input and output modules of the DSP can be customized
according to the actual […]

BARE – BE-3232D

The
network audio processor is a network audio processor with 32 digital inputs
and 32 digital outputs. It adopts the industry-leading ADI DSP SHARC21489
chip with a maximum operating frequency of 450MHz. The input and output
modules of the DSP can be customized according to the actual situation. At
the same time, it has independent […]

BARE – BKF-10

Single
10-inch two-way two-unit active full-range speaker

BARE – BKF-12

Single
12-inch two-way two-unit active full-range speaker