Dante-enabled Products

Go to:    > Full Catalog of Dante-enabled Products     > New Products     > DDM Ready Products     > Featured Products     > Licensed Manufacturers     > Dante MY16-AUD2

This is a near-exhaustive catalog of products by pro audio and video manufacturers that utilize Dante networking technology. These include products with Dante built-in, Dante interface cards, and the products that can be Dante-enabled via option cards. Note: This information is maintained by Audinate, and may not reflect the full product range currently offered by the listed manufacturers. For up-to-date information on any product ranges, please contact the manufacturer directly.
Share the news with your friends and colleagues

AMK - DT62-A

The AMK DT62- A loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.

AMK - DT62-A-X

The AMK DT62- A-X loudspeaker is powered by a POE+ network amplifier with Dante™ and AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

AMK - DT62-B

The AMK DT62-B loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.

AMK - DT64-B

The AMK DT64-B loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.

AMK - DT64-C

The AMK DT64-C loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.

AMK - DT64-C-X

The AMK DT64-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ / AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

AMK - DT82-B

The AMK DT82-B is a loudspeaker powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.

AMK - DT84-B

The AMK DT84-B A loudspeaker is powered by a POE+ network amplifier with Dante™ input. 

AMK - DT84-C

The AMK DT84-C (DT84-C-X for AES67, DDM Ready) is a Dante™ audio network addressable and self-amplified ceiling speaker system

Ampetronic - D10-1 Dante

The D10-1 digital amplifier is a 10 Amp single output class ‘D’ driver; meaning a 60%+ increase in energy efficiency over existing solutions.

Ampetronic - D10-2 Dante

The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. 

Ampetronic - D14-2 Dante

The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. 

Ampetronic - D7-2 Dante

The D7-2 Digital Hearing Loop Amplifier represents the global benchmark for digital audio induction loop systems. Featuring all the benefits of the Standard D14-2 driver with added Dante Input for additional Network Audio.

Amphenol - RJD2203-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and two AX series XLR analogue inputs in a molded housing.

Amphenol - RJD32A3-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR AES3 input, and one AX series XLR AES3 output connectors in a molded housing.

AMX - DGX1600-ENC

The new Enova DGX 1600 Enclosure (DGX1600-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content.

AMX - DGX3200-ASB-DAN

The DGX3200-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 800/1600/3200 enclosures.

AMX - DGX3200-ENC

The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. 

AMX - DGX6400-ENC

The new Enova DGX 6400 Enclosure (DGX6400-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content.

AMX - DGX800-ENC

The new Enova DGX 800 Enclosure (DGX800-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content.

Analog Way - LivePremier Aquilon Series

With ever-increasing video display sizes, 4K and 8K imaging, high dynamic range, high-frame rates, and rapidly-developing video and audio standards, the need for a forward-looking and highly adaptable video processing platform has never been higher. In response to this evolution in the professional audiovisual industry, Analog Way presents the most powerful 4K/8K presentation system in its category, with unique I/O capabilities and up to 120-megapixel throughput on Program outputs at 10bit 4:4:4, from a single chassis.

Analog Way - VIO 4K

The VIO 4K is engineered to be road-hardened to survive demanding live event environments. It provides worry-free operation with maximum uptime and low maintenance. 

Apart Audio - APDI

The Apart Audio APDI analogue audio to Dante™ audio convertor enables you to connect any analogue audio device to a Dante™ network. 

Apart Audio - APDO

The Apart Audio APDO Dante™ audio to analogue audio convertor enables you to send your audio to any analogue audio device over any Dante™ audio network. 

APC System - Dio4

Dio4是一款具备 4路输入4路输出带48v幻象供电的 Dante接口,若需要为 Dante系统添加话筒 /线路输入,它是理想的选择,同时还有4路线路输出,可以由Dante Controller软件指定4路网络数字音频在本地输出,同时前面板还可以对每个输入音频进行音量控制。

APC System - Dio40

Dio40音频接口是一种4通道模拟接口盒,是为广泛的市场应用设计的一种小型的1/2机架安装形式设备。

APC System - Dio41

Dio41是一款具备 4路输入的 Dante接口,若需要为 Dante系统添加话筒 /线路输入,它是理想的选择。

APC System - Dio4S

Dante的系统中,Dio4s的四个输入是一个理想的接口用来增加系统的麦克风/线路,四个平衡的线路输出可以同时使用,所有的音频通道都与Dante网络一起使用。

Apex Audio - Intelli-Power 10

 The Intelli-Series range of DSP-based system management and loudspeaker processing devices from Apex has gained a reputation for being both innovative and intuitive, always one step ahead of the game. The all-new Intelli-Power 10 is no exception.

Apex Audio - Intelli-X3 648

The Intelli-X3 series combines intuitive control software with fast and fully-featured system management processing. The Intelli-series sets the new benchmark in audio system management with Dante audio over IP networking capability supporting full network redundancy.

Apogee - Symphony I/O MK II

Symphony I/O Mk II is a multi-channel audio interface featuring Apogee’s newest flagship AD/DA conversion, modular I/O (up to 32 inputs and outputs), intuitive touchscreen display and optional world-class microphone preamps. 

Appsys ProAudio - multiverter MVR-64

Multi-format converter - converts and splits between ADAT, MADI optical, MADI coaxial, MADI-TP, AES50 and Dante - all in a 1U unit! Includes an headphones amplifier, redundant power supply and many other nice tools. Currently under development are break-out boxes to support even more protocols (AES3, AVB, Waves Soundgrid), as well as an integrated, high-quality, bi-directional ASRC module.

Arista - ARS-0002-A00

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models: ARS-0002-A00, ARS-0002-A01 and ARS-0200-A00.

Arista - ARS-0002-A01

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models: ARS-0002-A00, ARS-0002-A01 and ARS-0200-A00.

Arista - ARS-0200-A00

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models: ARS-0002-A00, ARS-0002-A01 and ARS-0200-A00.

Arista - ARS-0202-A00

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter. The product consists of four models: ARS-0202-A00, ARS-0202-B00, ARS-0202-A11, ARS-0202-B11.

Arista - ARS-0202-A11

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter. The product consists of four models: ARS-0202-A00, ARS-0202-B00, ARS-0202-A11, ARS-0202-B11.

Arista - ARS-0202-B00

E-Vocal  DUO+ is a dual channel analog input and dual channels analog output Dante converter. The product consists of four models: ARS-0202-A00, ARS-0202-B00, ARS-0202-A11, ARS-0202-B11.

Arista - ARS-0202-B11

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter. The product consists of four models: ARS-0202-A00, ARS-0202-B00, ARS-0202-A11, ARS-0202-B11.

Arista - ARS-1616

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the Dante MYRIAD product, ARS-1616 and ARS-3232.

Arista - ARS-3232

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the Dante MYRIAD product, ARS-1616 and ARS-3232.

Arrakis Systems - DARC Virtual Console

Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console.

Arrakis Systems - Simple IP 8A

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. 

AES67 compliant, it is excellent to use with any existing Dante or AES67 network.

Arrakis Systems - Simple IP 8D

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. 

AES67 compliant, it is excellent to use with any existing Dante or AES67 network.

ARX - NetSPLIT

The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into Dante mode or Analog mode.

ARX - Network DI

The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.

Ashly - digiMIX24

The digiMIX24 Digital Mixing Console gives you complete control over your performance space.

Ashly - ne1600

Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets.

Ashly - ne2400

Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets.

Ashly - ne4250

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers.