The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.
The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment.
The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network.
In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs.
Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.
The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.
The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.
