Audio Monitors

CTP Systems – Prehear D4080

CTP Systems

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs. The unit presents itself to the network as a ten input, two output device but also has ten analogue inputs and two analogue outputs.
All inputs are selectable to either or both of the two internal speakers, line level speaker outputs and headphone socket with individual volume controls, cut buttons and signal input LEDs. The unit includes a secondary port for Dante Redundancy or a switch output. Both ports include network activity LEDs. 

The Prehear 4080 covers all those ‘listen’ feeds required by production. Pre-fade listen feeds of presenters, off air feeds, and all those other bits and pieces that waste talkback matrix inputs can be fed directly to these units with convenient local control.

Each input may be switched to left, right, or both speakers. 

Each channel has an audio present (VOX) indicator, a volume control and a cut switch with bright blue illumination. 

There is a speaker cut button with red illumination and a stereo headphone socket suitable for stereo or 316 jacks. An indicator illuminates on successful connection to the network.

Both loudspeaker amplifiers have built in limiters to protect the loudspeakers.

All analogue inputs and outputs are on XLR and there are two line level outputs with switching following the left/right/both switches. 

Dimensions: 1RU 160mm deep.

More Details:http://www.ctpsystems.co.uk/dante.html