Products from CTP Systems, Powered by Dante

CTP – B-D2020

The B-D2020 is a compact, lightweight Dante presenter beltpack unit designed to fulfill all audio requirements for situations such as pitchside reporting or presenting.
The unit generates a programme sound microphone output with noiseless diversion of that output to two discreet talkback outputs plus a combined feed.There are two volume controls, each volume control may be fed with stereo or mono audio.Various talkback key functions, microphone gain, limiter, phantom power and sidetone are all conveniently adjusted using the OLED display.PoE or 12v dc powered.

CTP Systems – B-DF4

The SCD1010 is a cost effective Dante Commentary box supporting one commentator. Network connection may be fibre or copper and it has full network redundancy. Microphone amplifier gain and many other adjustments such as phantom power and limit levels may be controlled remotely via the SCD1010’s web server.

CTP Systems – DCD2020

The DCD2020 is a Dante enabled Commentary box supporting 2+1 commentators. 

CTP Systems – DCU304

The DCU304 is a Dante enabled Commentary / Announcer unit. It has four inputs, one programme output and three talkback outputs. 

CTP Systems – DDM888

The DDM888 is a 1RU Dante enabled stereo monitor unit with two high/midrange speakers and a single bass driver for quality monitoring. The unit can access sixteen stereo Danteinputs, eight stereo analogue inputs, eight balanced AES inputs and eight stereo SDI audio channels. The DDM888 includes a webserver GUI for easy setup.
Power may be PoE or Mains.

CTP Systems – DIO1600

The DIO1600 is a Dante enabled interface converting sixteen analogue line level inputs and sixteen analogue line level outputs to the audio network. All line level inputs and outputs have adjustable gain from +12dB to -12dB. The unit can operate at 48kHz or 96kHz sample rates.

CTP Systems – DIO1616MA

The DIO1616MA is a Dante enabled interface unit converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. 

CTP Systems – DIO1616MA-XLR

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may […]

CTP Systems – DIO816AES

The DIO816AES is an inexpensive way to get your AES audio into and out of the Dante or AES67 network. The unit has eight stereo AES inputs and eight stereo AES outputs with remote network level control. It can handle multiple sample rates and includes a secondary port for Dante Redundancy or a switch output.

CTP Systems – DIO88

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.

CTP Systems – DMIX30

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable […]

CTP Systems – DPM802

The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control.

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network.
In addition to the network connections three of the […]

CTP Systems – FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear […]

CTP Systems – NMS802

Designed primarily for switching between monitoring systems the NMS802 is a Dante enabled PoE Network Monitor Switch with one Dante stereo input, one stereo analogue input, eight Dante stereo outputs and one analogue stereo output. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control.