Products from CTP Systems, Powered by Dante | Audinate

Products from CTP Systems, Powered by Dante

CTP Systems – DCD2020

The DCD2020 is a Dante enabled Commentary box supporting 2+1 commentators. 

CTP Systems – DCU304

The DCU304 is a Dante enabled Commentary / Announcer unit. It has four inputs, one programme output and three talkback outputs. 

CTP Systems – DIO1616MA

The DIO1616MA is a Dante enabled interface unit converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. 

CTP Systems – DIO1616MA-XLR

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may […]

CTP Systems – DIO816AES

The DIO816AES is an inexpensive way to get your AES audio into and out of the Dante or AES67 network. The unit has eight stereo AES inputs and eight stereo AES outputs with remote network level control. It can handle multiple sample rates and includes a secondary port for Dante Redundancy or a switch output.

CTP Systems – DIO88

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.

CTP Systems – DMIX30

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable […]

CTP Systems – DPM802

The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control.

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network.
In addition to the network connections three of the […]

CTP Systems – FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear […]

CTP Systems – Prehear D4080

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.