I/O Interfaces

Media Technology Systems – Performer

Media Technology Systems

Media Technology Systems releases the new Dante enabled pro-audio interface. Featuring 2 proprietary design, high quality extended dynamic range Microphone, Line and Hi-Z instrument pre-amplifiers. The mic’ pre-amplifier features a continuous -60 to +4dBu, +24 max gain range – no pads, whilst maintaining 20dB of headroom at all settings. The Mic input has +48V phantom power on/off. The Line Input pre-amp’ operates across a continuous setting range of -40 to +24dBu, with +44dBu max, allowing it to accept extremely high signal levels such as the output of a power amplifier or 70Volt distributed sound system. The 1mΩ Hi-Z/Instrument input is ideally suited to work with classic guitar pickups, such as Fender Tele’, Strat’ or Gibson. Inputs, Mic/Line or Hi-Z, are converted and routed to a Dante network, with 2 network return channels available at the Performer’s ‘Network Return’, line level outputs. The Performer is AES67 compliant.
The XLR, +4dBU balanced Di-Out is assignable from either the Mic/Line or Hi-Z input. The Performer features a ‘road tough’ aluminium extruded case with recessed protected controls and connectors, and removable rubber protective ‘bumpers’. The Performer is P.o.E. powered via a suitable network switch or available PoE injector. A 1U single or dual rack mount is available. Product dimensions HWD: 42mm x 143mm x 168mm, 1 5/8″ x 5 3/4″ x 6 5/8″.

更なる情報:https://www.mts-sales.com