New Dante-enabled Products | Audinate

New Dante-enabled Products

Cypress – AIP-D1401

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

Adjustable phantom power from +0V to +48V.Easily route audio with 3rd party units in the Dante network.May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

Cypress – AIP-D4101

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

Adjustable phantom power from +0V to +48V.Easily route audio with 3rd party units in the Dante network.May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

Cypress – CPLUS-V4H2HP-DTDA

UHD+ 4×2 HDMI Matrix with Dante and Dolby Digital & DTS Stereo Audio Decoder

Enabled HDMI de-embedded/embedded designed to bridge 2-channel PCM HDMI audio to/from a Dante® audio network. Balance Audio out can be switch between HDMI De-embedded audio or Dante-In source Dante® audio networking utilizes standard IP networks to transmit high-quality, uncompressed audio with near-zero latencay Supports […]

Patton – FPX6000 Series Encoder

Patton’s FPX6000 enables 8 audio channels (transmit or receive) and 1 HDCP encryption support video channel (transmit or receive) to be easily inserted onto an existing Ethernet network backbone without suffering the performance issues and management difficulties associated with audio and video over IP.

Lucky Tone – Dante BW 0404

Dante BW 0404 is a wall panel for converting among analog, Bluetooth and Dante signal. It is widely used for teleconference, audio longdistance transmission and other applications.

Lucky Tone – DP 180POE DSP

> Built-in Dante module.
> Built-in power amplifier module and its system efficiency > 70% DSP controlling software.
> PoE power supply .
> Over-current protection, Thermal protection and Overload protection.

Lucky Tone – DANTE 860DUO POE DSP

> 2-way ABS in ceiling speaker at high performance.
> With 2 tweeters.
> With crossover to produce clear yet powerful sound.
> Built-in Dante module.
> Built-in power amplifier module and its system efficiency > 70% DSP controlling software.
> PoE power supply.
> Good for high demand audio environment.

Lucky Tone – DANTE 640DUO POE DSP

> 2-way ABS in ceiling speaker at high performance.
> With kevlar driver and 2 tweeters.
> With crossover to produce clear yet powerful sound.
> Built-in Dante module.
> Built-in power amplifier module and its system efficiency > 70%.
> DSP controlling software.
> PoE power supply.
> Good for high demand audio environment.

Lucky Tone – MA-1000TD

MA-1000TD is a multi-function network DSP digital High-Z and low-Z power amplifier 2*[email protected]Ω, 2*[email protected]Ω, bridged [email protected]Ω, low-Z [email protected]Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation […]

Lucky Tone – MA-XXXTD Series

Highly flexible mixer amplifiers available at 120, 240, 350 and 500W RMS power and equipped with all necessary microphone and aux inputs for a wide variety of voice and background music applications such as retail shops, restaurants and bars, service centers, houses of worship, warehouses and many more.

Lucky Tone – Dante 448V

Dante 4×4 input/output inerface can add 4 channels(input and output) for the existing network audio system with at low cost. Because of the small size, it can be installed
anywhere-near to audio source or receiver, therefore no need the expensive analog connection which is easy to cause interference.

Patton – FPX6000 Series Decoder

Patton’s FPX6000 enables 8 audio channels (transmit or receive) and 1 HDCP encryption support video channel (transmit or receive) to be easily inserted onto an existing Ethernet network backbone without suffering the performance issues and management difficulties associated with audio and video over IP.

Bolin – D20S (12G-SDI) Decoder

The Bolin D20S(12G-SDI) decoder is part of Bolin DanteAV camera system. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0 and/or 12G-SDI, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.

Bolin – D10H (HDMI) Decoder

The Bolin D10H(HDMI) decoder is part of Bolin DanteAV camera system. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0 and/or 12G-SDI, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.

Bolin – D220 (Full HD) PTZ Camera

Bolin D Series PTZ camera is the world’s first DanteAV hardware enabled pan, tilt, zoom camera interfacing video and audio in a standard 1 Gbps network, and pro-viding uncompromised video quality with lowest latency and synchronization. Designed to seamlessly integrate into an existing Dante audio ecosystem, the D220 PTZ is managed using the Dante Controller […]