Dante-enabled Products | Audinate

Dante-enabled Products

All Categories
All Manufacturers
Wohler – iAM1-8

8 channel, triple screen, 3G-SDI & Analog Audio Monitor with options for AoIP, MADI & AES3.

Wohler – iAM2-8

8 channel, dual screen, 3G-SDI & Analog Audio Monitor with options for AoIP, MADI & AES3

Wohler – iVAM1-1

The all new iVAM1-1 represents a simple but well featured and competitively priced video and audio monitor. With fast easy and monitoring of audio and video, this unit comes standard with 3G-SDI and Analog inputs. License other signal formats as and when needed, either initially or after purchase.

Wohler – iVAM1-3

3G SDI, AES3 & Analog Video/Audio LCD Monitor with Optional Signal Upgrades for ST-2110, ST-2022, & MADI & AES3. 1RU. Touch-capable. Video, meters & loudness measurement.

Wohler – iVAM2-2

SDI & 2110 Video-Audio Monitor with SDI & Analog plus optional upgrades for 2110, 2022, MADI, AES3, Dante & Ravenna. 2U. Video, meters & loudness.

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

Wohler – OPT-DANTE (iAM)

Enable monitoring from up to a 64ch Dante™ Input in iAM Series products.

Wohler – OPT-DANTE (iVAM)

This optional hardware card card enables monitoring from a 64 channel Dante™ Input.

Wohler – OPT-MADI/ANLG/TOS (12G)

Enables monitoring of 8 Analog channels on DB-25, an Optical TOSLINK Input, monitoring of 1 x MADI64 input via BNC, and an SFP Cage that accepts MADI Optical inputs.

Wohler – OPT-RAVENNA 64 (iVAM)

Enable monitoring from up to a 64ch Ravenna / AES67 Input. Hardware card with activation key.

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet – developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and […]

WorkPro – DD4

DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet – developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

WorldCast – APT AoIP / MPXoIP MULTI-CHANNEL CODEC

The APT MULTI-CHANNEL CODEC is a compact and efficient solution for the transport of multiple channels of audio or MPX content over IP links. It can support up to 16 channels of audio within a single unit of rackspace – and even more IP streams when using multicast or multiple unicast technology.

WorxAudio – TrueLine V5

The V5 is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system to deliver high quality reinforcement of music and speech in a variety of applications including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations.

WorxAudio – TrueLine V5M

Like all loudspeakers systems in the WorxAudio TrueLine Series, the transducer complements in the V5M are top notch.