Products from Rane, Powered by Dante

Rane – DANTEx

The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample […]

Rane – EXP2x Dante Expander

The EXP2x is an input/output expander that enables the HAL1x to send 32 and receive 32 audio channels from other Dante™ devices. Use the EXP2x to interface a HAL1x System with a Dante network. Applications abound in houses of worship, installed sound, performing arts venues, education and corporate environments. The EXP2x allows connecting a Dante […]

Rane – HAL 1x

A HAL1x Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs. It is unique among the HAL Multiprocessors because it carries an Expansion Bus, which can increase the I/O up to 512 in x 512 out by […]

Rane – HAL EXP1x

The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate.

Rane – HAL EXP3x

The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation).

Rane – HAL EXP5x

The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls.

Rane – HAL EXP7x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block.

Rane – TERMINAL 1010x

The Terminal 1010x takes the DSP Experience to the next level with an intuitive front-panel that enables users to control 10 analog balanced inputs for Mic/Line/+48V and 10 balanced outputs. There are also 6 flexible RAD Plus PoE ports to connect breakout boxes and wall plate remote controls and 4 Universal GPIO logic ports for […]