Productos de Symetrix, equipados con Dante

With a singular focus on installed systems DSP, Symetrix delivers high performance audio hardware and software, backed by the highest caliber of customer care. We continuously expand the scope and capabilities of our product offerings to range from simple single unit budget installations to state-of-the-art 100,000 seat stadiums, and everything in between. Our purpose is to lead by innovation: early-stage implementation of Dante™ network audio is just one example.

Symetrix – EDGE

Edge is a powerful, configurable, DSP frame with four 4-channel I/O slots. An array of I/O card options including analog, digital, and AEC tailor the system to specific project requirements. On-board 10/100 and gigabit switches lower system cost and reduce complexity with less hardware and fewer potential points of failure. Multiple user control options include zero […]

Symetrix – Prism 0x0

Prism 0x0 with 64×64 Dante™ and powerful Symetrix DSP processing.

Symetrix – Prism 12×12

Prism 12×12 with 64×64 Dante™ and powerful Symetrix DSP processing.

Symetrix – Prism 16×16

Prism 16×16 with 64×64 Dante™ and powerful Symetrix DSP processing.

Symetrix – Prism 4×4

Prism 4×4 with 64×64 Dante™ and powerful Symetrix DSP processing.

Symetrix – Prism 8×8

Prism 8×8 with 64×64 Dante™ and powerful Symetrix DSP processing.

Symetrix – Radius 12×8 EX

Radius DSPs are equipped with 128 (64×64) redundant Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories – including third party Dante-enabled end points.

Symetrix – Radius AEC

Radius DSPs are equipped with 128 (64×64) redundant Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories – including third party Dante-enabled end points.

Symetrix – Radius NX 12×8

The Radius NX 12×8 (12 analog inputs, 8 analog outputs) features 64×64 redundant Dante and identical DSP resources.

Symetrix – Radius NX 4×4

The Radius NX 4×4 (4 analog inputs, 4 analog outputs) features 64×64 redundant Dante and identical DSP resources. The reduced cost of the 4×4 makes it extremely competitive in applications where many Dante endpoints are routed to a primary DSP and fewer analog connections are required.
Optional virtualized and scalable AEC coprocessor module.  For conferencing applications […]

Symetrix – xIn 12

The cost effective xIn 12 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog inputs’ parameters (5 gain levels, trim, mute, phantom power), along with bus assignments, are configured using SymNet Composer open […]

Symetrix – xIn 4

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. 

Symetrix – xIO 4×4

The cost effective xIO 4×4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel.

Symetrix – xIO Stage 4×4

Expand Analog I/O Using Dante. For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O Expanders use Composer for setup. Using Composer eliminates switches, circuit board jumpers, and mechanical adjustments as well as the need for third party software applications.

Symetrix – xOut 12

The cost effective xOut 12 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog outputs’ parameters (gain and mute), along with bus assignments, are configured using SymNet Composer open architecture software. xOut 12 […]