Dante-enabled Products

AtlasIED - HPA2602

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

AtlasIED - HPA4202

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

Atlona - OmniStream AT-OMNI-232

The Atlona OmniStream™ AT-OMNI-232 is a Dante networked audio interface that transmits and receives two channels of audio over a network. AT-OMNI-232 devices are ideal for integrating microphones and other audio sources with a Dante-equipped DSP and OmniStream AV decoders.

Attero Tech - un4DI

The unD4I 4-input Dante interface is a convenient, cost-effective way to add mic/line inputs to an existing Dante-based networked audio system.

Attero Tech - unD32

The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations.

Attero Tech - unD3IO

The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

Attero Tech - unD4O

A 4-output Dante interface that is a convenient, cost-effective way to add line-level outputs to an existing Dante-based networked audio system.

Attero Tech - unD6IO-BT

The unD6IO-BT is the latest addition to Attero Tech's innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive.

Attero Tech - unDIO2x2

The unDIO2x2 2 In/2 Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

Attero Tech - unDNEMO-BT

An audio monitoring solution aimed at providing end users with a simple solution for selection and monitoring of up to 64 Dante audio channels. Supports Bluetooth© headphone and headset monitoring, as well as the ability to bridge Bluetooth© audio sources to the Dante network.

Audac - ANI22

The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more.

Audac - ANI44

The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more.

AUDAC - SMA350

The AUDAC SMA350 is a two channel Class-D power amplifier with an output power of 2 x 350 Watt.

AUDAC - SMA500

The AUDAC SMA500 is a two channel Class-D power amplifier with an output power of 2 x 500 Watt.

AUDAC - SMA750

The AUDAC SMA750 is a two channel Class-D power amplifier with an output power of 2 x 750 Watt.

AUDAC - SMQ350

The SMQ series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations.

AUDAC - SMQ500

The AUDAC SMQ500 is a four channel Class-D power amplifier with an output power of 4 x 500 Watt.

AUDAC - SMQ750

The AUDAC SMQ750 is a four channel Class-D power amplifier with an output power of 4 x 750 Watt.

AUDAC - XMP44

The XMP44 is a professional modular audio system with 4 SourceCon™ interface card slots whereto a wide variation of optional modules can be installed. 

Audinate - Dante Via

Dante Via is easy-to-use software that delivers unprecedented routing of computer-based audio, allowing a wide range of applications and devices to be networked and interconnected, easily and inexpensively.

Audio Ltd - DX1010

The DX1010 is a fully digital, true diversity receiver (which means signal switching takes place between the two receivers at the audio frequency level with no interruption of the signal). It features full encryption and has an analogue output and an AES digital output that’s SuperSlot™ compatible.

Audio Ltd - TX1010

Measuring just 83 x 64 x 18mm, the TX1010 transmitter is built from milled, high grade aluminium and features a switchable power output operating at 50mW, 20mW or 5mW which is supplied by two 1.5V LR6 AA batteries housed in a hinged, lockable compartment.

Audio-Technica - ATND931C

With its low-profile and rugged-yet-highly-flexible design, the ATND931C cardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

Audio-Technica - ATND931H

With its low-profile and rugged-yet-highly-flexible design, The ATND931H hypercardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

Audio-Technica - ATND931ML

With its low-profile and rugged-yet-highly-flexible design, The ATND931ML MicroLine® (line cardioid) condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

Audio-Technica - ATND931WC

With its low-profile and rugged-yet-highly-flexible design, The ATND931WC cardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

Audio-Technica - ATND931WH

With its low-profile and rugged-yet-highly-flexible design, The ATND931WH hypercardioid condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications. 

Audio-Technica - ATND931WML

With its low-profile and rugged-yet-highly-flexible design, The ATND931WML MicroLine® (line cardioid) condenser gooseneck microphone is a perfect fit for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

Audio-Technica - ATND933C

The ATND933C cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica - ATND933H

The ATND933H hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica - ATND933ML

The ATND933ML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. 

Audio-Technica - ATND933WC

The ATND933WC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica - ATND933WH

The ATND933WH hypercardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica - ATND933WML

The ATND933WML MicroLine® (line cardioid) condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

Audio-Technica - ATND971

Audio-Technica has bridged the gap between audio and IT with the first wired microphones that transmit audio and control data together over the Dante network protocol.

Aurora Multimedia - DTX-AMP1

The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more.