Dante-enabled Products

Welcome to the Partner Products catalog. This is a non-exhaustive catalogue of Dante-enabled products, and products that can be Dante-enabled via option cards, from some major Original Equipment Manufacturers.

Note: This information is maintained by Audinate, and does not necessarily reflect the actual product range currently offered by the listed manufacturers. For up-to-date information on any product ranges, please contact the manufacturer directly.

Dynacord - PowerH 2500

The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.

Dynacord - PowerH 5000

The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. 

EAW - Anna

Anna™ is the newest introduction to EAW’s flagship line of Adaptive™ Systems, providing all the benefits of Adaptive performance in a high-output mid-sized enclosure.

EAW - Anya

EAW Anya is a complete, self-contained, high-power sound reinforcement system that adapts all performance parameters electronically, allowing it to be used in virtually any application.

EAW - RADIUS RSX12

The RSX12 12” subwoofer is flyable and ultra-compact, ideal for installs or other applications with minimal floor space for subwoofers. 

EAW - RADIUS RSX126

The RSX126 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

EAW - RADIUS RSX129

The RSX129 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

EAW - RADIUS RSX18

The powerful RSX18 18″ subwoofer is ideal for production applications, offering push-button cardioid operation for added sonic control. 

EAW - RADIUS RSX208L

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms and system integrators. 

EAW - RADIUS RSX86

The RSX86 features onboard bi-ampli ed electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response. 

EAW - RADIUS RSX89

The RSX89 features onboard bi-amplified electronics (500W RMS/ 1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.

Ecler - DN44BOB

ECLER DN44BOB is a 4 inputs and 4 outputs DANTE Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals.

EM Acoustics - DQ10

The DQ10 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.

EM Acoustics - DQ20

The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.

EM Acoustics - DQ6

The DQ6 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.

EM Acoustics - DSC48

The DSC48 is an advanced digtal system controller designed for use with loudspeakers and subwoofers within the EM Acoustics product range, taking audio performance to the next level with new audio converters and advanced DSP algorithms that make full use of the processing power offered by the latest 4th generation SHARC DSPs.

Evertz - MMA-10G-HUB

The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series. The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology.

Extron - AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system.

Extron - AXI 22 AT D

The Extron AXI 22 AT D is a single-gang decorator-style audio interface for integrating two mic/line sources onto a Dante™-enabled audio system.

Extron - AXI 44 AT

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. 

Extron - AXP 50 C AT

The Extron AXP 50 C AT is a five input audio expansion processor with Extron ProDSP™ for integrating remote microphones and other sources onto a Dante™-enabled audio system.

Extron - AXP 64 C AT

The Extron AXP 64 C AT is an audio expansion processor with six mic/line inputs and four line outputs for remote connectivity to a Dante™-enabled audio system.

Extron - DMP 128 C P AT

The Extron DMP 128 Digital Matrix Processor is a 12x8 audio mixer featuring Extron ProDSP™, automixing, AEC, and Dante™ audio networking, It has FlexInputs to process Dante channels in place of local mic/line inputs, and POTS analog phone interfacing.

Extron - DMP 128 Plus AT

The DMP 128 Plus AT is a Digital Matrix Processor featuring Extron ProDSP™ 64-bit floating point technology. It is a 12x8 audio processor with Dante, 4 channels of USB audio, 8 audio file players, an ACP bus for audio control panels, and configurable macros.

Extron - DMP 128 Plus C AT

The DMP 128 Plus C AT is a Digital Matrix Processor featuring Extron ProDSP™ 64-bit floating point technology. It is a 12x8 audio processor with Dante, AEC, 4 channels of USB audio, 8 audio file players, an ACP bus for audio control panels, and configurable macros.

Extron - DMP 128 Plus C V AT

The DMP 128 Plus C V AT is a Digital Matrix Processor featuring Extron ProDSP™ 64-bit floating point technology. It is a 12x8 audio processor with Dante, AEC, VoIP, 4 channels of USB audio, 8 audio file players, an ACP bus for audio control panels, and configurable macros.

Fairlight - MSX 1000

IBC 2016 technology showcase product

The 1RU, 19” rack mounted MSX1000 providing 6 slots for I/O modules, a built in 448 x 448 point router, and optional dual redundant hot-swap PSU and versatile sync system. The perfect solution for medium capacity audio I/O.

Fairlight - MSX 3000

IBC 2016 technology showcase product

The MSX 3000 delivers Fairlight’s renowned sound quality for the converged consoles. Its modular design, incorporating cutting edge FPGA technology, delivers a customisable and very cost effective audio I/O solution.

Fairlight - MSX 500

IBC 2016 technology showcase product

The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go.

Ferrofish - A32 DANTE

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks.

Ferrofish - Verto Series

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks.

Flex AV - FM-19D

Ideal for meeting room applications, the FM-19D showcases a host of features designed to extend the capabilities of any integrator. Including audio capture, user interaction, visual indicators, network controls, and audio feedback.

Focusrite - Red 16Line

Red 16Line is a 64x64 Pro Tools | HD™ and dual Thunderbolt™ 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio.

Focusrite - Red 4Pre

Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity.

Focusrite - RedNet 1

RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility.