Dante Analog Output Module

The Dante Analog Output Module™ is a Dante® audio to analog audio adapter module, supporting one RJ45 Dante input, and one or two balanced analog outputs. It is designed for use in products assembled using an overmold process.

The Dante Analog Output Module is the perfect foundation for your own line of Dante analog output adapters.

Dante Analog Output Module products enable simple connection of analog equipment to a Dante network. The module can receive audio channels from a Dante network and provide studio-quality, low-latency audio via balanced output connectors to analog audio equipment. Any audio available on the Dante network can be routed via the outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analog audio device. Adapters (for example XLR-to-RCA and XLR-to-phono) can be used to connect to audio equipment without the required built-in connectors.

Dante Analog Output Module uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

Dante Analog Output Module features a high-quality digital-to-analog converter, and supports a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante Analog Output Module devices connected to the Dante network.

Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

Manufacturers can use this module in a variety of small footprint enclosures with appropriate analog connectors to rapidly bring complete products to market. 


  • Compact form factor designed for overmoulding
  • Cost-effective with excellent audio specs
  • Complete for rapid product development 



  • Input Connector: 1x RJ45 Ethernet
  • Output: 1x or 2x balanced analog connectors


  • Power Consumption: < 2 Watt
  • Power over Ethernet: Class 1 802.3af POE PD compliant

Analog Audio

  • Output level (balanced): +4dBu @ 0dBFS
  • Output Impedance: 150 ohm balanced or 75 ohm unbalanced
  • Frequency Response: 20 Hz to 20 kHz (-/+0.5 dB)
  • Dynamic Range: > 100 dB
  • Signal to Noise: > 100 dB
  • Total Harmonic Distortion: < 0.01% at +4dBu
  • Channel Separation: > 100 dB
  • Channel Matching: < 0.25 dB

Dante Audio

  • Number of Channels: 1 or 2 output channels
  • Sample Rate: 44.1 kHz, 48 kHz (default), and 96 kHz
  • Bit Depth: 24 bits
  • Network Speed: 100 Mbps 

Download the Dante Analog Output Module datasheet below.

› Dante is easy to integrate, easy to install, and easy to use. Dante integrates media and control for your entire AV system over a single IP network. Dante performs best, and sounds even better.

Contact Sales

For Technical Support please click here or contact the audio equipment manufacturer directly.